Stable Coat from Protek is a waterproofing wood stain for previously treated timber. This acrylic water based micro-porous stain is formulated with a ultra high water repellent that is child and animal safe, making it perfect for stables, rabbit hutches, chicken coups, kennels, sheds and summerhouses. Stable Coat comes in a wide range of colours allowing you to choose the best option for your garden building or project. This water based treatment can be applied by brush or low pressure sprayer and is compatible with pressure treated timber.

• Wide range of colours to suit your taste 
• Water based micro-porous acrylic stain
• Low VOC and low odour 
• Waterproof natural look finish which allows wood grain to show through
• Can be applied by brush or sprayer
  
• 5 Litre tub 
• Made in the UK

Application

Surfaces should be cleaned with warm water, detergent and a stiff brush. Make sure that any pressure treatment residue, mould and algae is removed and rinse well. If your timber has been treated, no basecoat or primer is required. If your timber isn't treated with a preservative then depending on the type of wood and product, you may want to use the Protek Wood Preserver ++ first. Ensure that timber is fully dry. Do not apply to wet timber or if rain is expected within 48 hours, or if the temperature is below 5 degrees. Two coats of Stable Coat is recommended. Touch dry within 2 hours depending on drying conditions and humidity. Unprotected persons and animals should be kept away from coated areas for 48 hours or until surfaces are dry.