Royal Exterior/Interior Superior Wood Finish from Protek is a quick-drying water repelling wood stain that is robust, hardwearing and designed to provide a decorative finish to interior and exterior timber. It is formulated using a high quality linseed oil resin that provides good adhesion to timber, leaving it with a rich long-lasting colour that has a translucent satin sheen that allows the wood grain to show through. It has high water and UV resistance plus mould and fungal protection. Royal Wood Stain is a high performance luxurious product that has good penetration, exception weather protection, helps to prevent wood from splitting and has a long lasting rich colour. It comes in a wide range of colours allowing you to choose the best option for your garden building or project. This water based treatment can be applied by brush, roller or low pressure sprayer. 

• Wide range of colours to suit your taste 
• Water based acrylic from natural linseed oil 
• Opaque satin finish 
• Low VOC and low odour
• Translucent allowing wood grain to show through   
• Water repellent with a mould and fungal inhibitor
• For softwood or hardwood timber
• Suitable for conservatories, garden furniture, cladding, summerhouses, log cabins, gates, windows and doors
• Also suitable for interior use in log cabins or summerhouses
• Can be applied by brush, roller or low pressure spray gun.  
  
• 2.5 Litre tin 
• Made in the UK 

Application

Surfaces should be cleaned with warm water, detergent and a stiff brush. Make sure that any previous surface treatments, pressure treatment residue, mould and algae is removed and rinse well. If your timber has been treated, no basecoat or primer is required. If your timber isn't treated with a preservative then depending on the type of wood and product, you may want to use the Protek Wood Preserver ++ first. If applying a white or light shade wood finish, a Stain Blocking Primer is recommended to prevent the top coat discolouring from possible tannin bleed. Ensure that timber is fully dry, do not apply to wet timber or if rain is expected within 48 hours, or if the temperature is below 5 degrees. Touch dry within 2 hours depending on drying conditions and humidity. 

When applied to interior floorboards a top coat of breathable polyurethane sealant or varnish should be applied to protect against heavy foot traffic.