Wood Stain & Protect Clear Top Coat from Protek is designed to provide waterproofing protection to all types of timbers whilst allowing the natural colour and grain to show through. It can also be applied to any porous surface such as terracotta pots and even masonry, giving protection against water, mould and UV damage to all manner of things around the garden. Apply it as a top coat over Protek's Wood Stain & Protect coloured wood stains to prevent colour fading and increase waterproofing and protection. Can be applied by brush, roller or low pressure sprayer.

• Water based clear top coat
• Suitable as a top coat for Protek Wood Stain & Protect 
• Allows wood grain to show through
• Low VOC and low odour 
• Waterproof coating for treated and untreated timber
• Suitable for rough-sawn and planed wood
• Suitable for garden buildings, furniture, children's play equipment, terracotta pots, planters, animal housing, fencing and trellis.
• Can be applied by brush, roller or low pressure sprayer
• Made in the UK 

Surfaces should be cleaned with warm water, detergent and a stiff brush. Make sure that any previous surface treatments, pressure treatment residue, mould and algae is removed and rinse well. If your timber has been treated, no basecoat or primer is required. If your timber isn't treated with a preservative then depending on the type of wood and product, you may want to use the Protek Wood Preserver ++ first. Ensure that timber is fully dry. Do not apply to wet timber or if rain is expected within 48 hours, or if the temperature is below 5 degrees. Touch dry within 2 hours depending on drying conditions and humidity.