Restol Wood Oil from Protek is designed for use on all types of softwood and hardwood, either untreated or with surface or pressure treated finishes to offer protection all year round. The wood oil contains an active UV filter that preserves the colour and forms a protective layer to help prevent the timber from weather and UV damage, giving the timber a long lasting water-repellent and weather resistant coat to extend the life of the wood. Restol Wood Oil is made from Linseed oil with a selection of different coloured stains that combine to penetrate deep into the wood, while also leaving a translucent protective coating on the surface. Can be applied by brush, roller and sprayer. Suitable for all your external wood from garden chairs to veranda's, summerhouses to decking. Recommended by Forest Garden Products for top coating their untreated log cabins.

• 2.5 Litre tin
  
• Protection for untreated and treated timber
• Linseed oil based product
• Wide range of colours available
• Waterproofs and protects against UV rays
• Easy to apply and quick drying
• Low VOC
  
• Can be applied by brush, roller or low pressure spray gun
• Gloss finish - after application the level of gloss will deteriorate to a silk finish overtime
• Made in the UK

Surfaces should be clean and dry with any previous paint or wood stain, mould or algae completely removed. No basecoat or primer is required. For pressure treated timber two coats are recommended and for untreated timber three coats are advised. Ensure that timber is fully dry prior to application. Do not apply to wet timber or if rain is expected within 48 hours, or if the temperature is below 5 degrees. Best applied when it is dry and there is a light breeze. It should not be too warm, or in excessive direct sunlight. Touch dry within 4 to 6 hours depending on drying conditions and humidity can be overcoated in 24 to 48 hours.