10cm x 180cm Hampton Gate Post
- Brand: BIC
- Product Code: BIC945
- Availability: In Stock
Wall-Mount: A Hampton Post can be fixed to a brick wall using frame fixing screws or masonry bolts (not supplied), simply cut the post slightly so that it is slightly taller than the gate and seal the exposed timber with some preservative. Leave a gap between the ground and the bottom of the post to avoid trapping moisture, this will help to extend the life of your post.
Concrete-In: When burying a Hampton Post into the ground, the hole should be
approximately 30cm in diameter and 80cm deep. Once you have dug your hole,
fill with 20cm of gravel to aid drainage and extend the life of the post. Sit
the post on the gravel and fill the remaining hole with concrete. Use a spirit
level to make sure your post stays vertical as you fill. Check
the drying time of the concrete you have chosen to use and do not hang the gate
until it has hardened, usually 24 hours or more after pouring.
|Direct from the factory in 3 to 4 weeks|
|Only available for delivery when ordered with the Hampton Gate|