Court Bolt Down Railing Posts
- Brand: BIC
- Product Code: BIC075P
- Availability: In StockDelivery: Within 5 working days
- RRP: £19.50
2" (50mm) square Railing Post for use with Court Railing Panels. The posts are blank, giving you flexibility on the positioning of your fittings, allowing the post to be used as corner, end or in-line posts. The posts are supplied with self-drilling TEK screws that allow you to attach your fittings to the posts in the required position without needing to pre-drill holes, this makes it much easier to install on stepped walls. The posts are zinc plated to prevent rust and have a black powder coated finish.
- Length: 500mm (19¾")
- Width: 50mm (2")
- Depth: 50mm (2")
- Footplate Size: 150mm x 60mm (6" x 2½")
The standard railing posts have a flat top but we also have ball top railing posts should you require something more decorative. This will increase the overall length of the post to 550mm (21½").
Should you wish to hang the railing panels on our posts, be sure to allow for the post widths. Eg. a 6ft railing panel and two 50mm (2") posts will fit a 6ft 4in gap.
Please ensure that the bolt down railing or fence posts are installed so the bolt down footplate runs at a 90o angle to the railing.
The steel is electro-galvanised to add a thin layer of zinc on the steel to prevent rust. The post is then powder coated in a black paint to give a smooth satin finish. This allows the post to be installed straight away and will be maintenance free for 5 to 10 years. Once rust starts to show, the post should be painted with a suitable exterior metal paint such as Hammerite.
|Within 5 working days|
|Only available for delivery when ordered with the Court Railings|
Surcharge applies for Highlands and Islands
Not available for delivery