The wrought iron style Court Railings are constructed using solid steel with a hoop top which makes them ideal for installation in areas where children may be playing such as near playgrounds and schools. The steel used in the manufacture of this railing is electro-galvanised to add a thin layer of zinc on the steel to prevent rust. The railing is then powder coated in a black paint to give a smooth satin finish. This option allows the railing to be installed straight away and offers protection from rust for up to 10 years. Once rust starts to show, the railing should be painted with a suitable exterior metal paint such as Hammerite.

50mm (2") square bolt-down Railing Posts are also available if required.

Specification

How to Measure Railings

For the width, measure the gap you have between your pillars or posts. If you are replacing an existing railing panel, do not measure the railing itself as this will not take into account the space for the hinges that are supplied and required for installation. If you are building a new wall, ensure you leave a gap between your pillars of exactly 1830mm (6ft).

The height measurement of the railing is from the bottom frame to the highest point in the railing.

When installing your railing, remember to allow for base clearance, typically 50mm (2").

General Information

Fittings. The Court Railings are supplied with hinges. Please note the hinges require a flat vertical surface for installation.