Using Store as ADMIN
5 5 5

Drayton Tall Single Gate

  • Drayton Tall Single Gate
  • Brand: BIC
  • Product Code: BIC511
  • SKU:
  • Availability: In Stock
    Delivery: Direct from the factory in 2 to 4 weeks
  • £199.95


Free Delivery*

Share



The Drayton Tall Single Gate is a solid wooden gate, with a thick frame and bracing designed to match the Drayton Estate Gates. These heavy duty gates can be used independently of the double gates where security requires a strong, secure barrier to your garden.

The gate is available with two heights options. The 150cm gate matches the shoulder height of the Drayton Arch Top Gates and the 180cm tall gate matches the shoulder height of the Drayton Flat Top Gates.

The gates are constructed from smooth planed Scandinavian Redwood which has been pressure treated for a long, maintenance free life. The front boards are a tongue and groove construction, framed on both sides and across the top by 56mm bracing that is thick enough to accommodate a mortice lock (not supplied). The back of the gate has two vertical, three horizontal and two diagonal heavy duty braces for maximum strength and durability.

It is recommended that wooden gate posts are used when installing these gates. Optional smooth sawn 10cm square pressure treated posts are available.

An optional galvanised fittings pack that includes a Ring Latch and 2 x 18 inch Hook & Band Hinges is also available.

The Drayton Tall Single Gate is available in the following sizes:

OPTIONGATE WIDTHGATE HEIGHTPRICE
75cm750mm (29.5")1500mm (59")£199.95
90cm900mm (35.5")1500mm (59")
£224.95
105cm1050mm (41.5")1500mm (59")
£249.95
75cm750mm (29.5")1800mm (71")£219.95
90cm900mm (35.5")1800mm (71")
£249.95
105cm1050mm (41.5")1800mm (71")
£279.95

See size chart below to calculate how much space you will require to install your gate when using our 10cm (4") square gate posts.

GATE WIDTHEXPANSION GAPPAIR OF POSTSTOTAL GAP REQUIRED
75cm1cm20cm96cm (38")
90cm1cm20cm111cm (44")
105cm1cm20cm126cm (50")

If our standard sizes won't fit, a made to measure service is available for this gate. Please click the tab below to be directed to the made to measure page.

View Made to Measure

Information about your gate

Fittings. The Drayton gates are not supplied with any fittings; however an optional fittings pack is available which includes the correct size hinges and latch for this weight of gate. The fittings we have available are galvanised to prevent rust. The gate has three horizontal braces on the back. Hinges should be fitted to the top and bottom brace.

Wooden Posts. Posts should be dug in approximately 60cm deep and held in place with concrete, or bolted to the wall using masonry bolts or frame fixing screws. A small gap must be left between the post and the gate to allow for expansion of the wood.

Finish. The Drayton gates are supplied pressure treated which leaves the wood with a temporary green tint. If left to weather, the wood will fade to a silvery grey colour; however you can change the colour straight away by staining the wood using Protek Timber Eco Shield, or it can be painted after it has been allowed to weather for at least 3 months using a product compatible for use with pressure treated timber. 

Specification

SIDE FRAME70mm x 70mm
BACK BRACING70mm x 54mm and 44mm x 44mm
TONGUE & GROOVE BOARDS95mm x 14mm
JOINTSMortise and tenon
WOOD TREATMENTPressure treated

 Direct from the factory in 2 to 4 weeks
 Delivery to UK mainland only. Surcharges apply to Highlands.

 FREE
 Surcharge applies for Highlands and Islands
 Not available for delivery

Write a review

Note: HTML is not translated!
    Bad           Good
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.







Add GardenOasis App. Press Then select "Add to Home Screen"