Using Store as ADMIN

Drayton Single Gate

  • Drayton Single Gate
  • Brand: BIC
  • Product Code: BIC500
  • SKU:
  • Availability: In Stock
  • £99.95


  • Free Delivery*

    Share


The Drayton Single Gate is a high quality, solid gate featuring thick frames and heavy duty bracing designed to provide a secure and attractive pedestrian gate to any property, Each gate is hand made in the UK and is designed to match the Drayton Double Gate and the Drayton Arch Top Double Gate.
The gates are constructed from smooth planed Scandinavian Redwood which has been pressure treated for a long, maintenance free life. The front boards are a tongue and groove construction, and securely framed on both sides. The back of the gate has two vertical, two horizontal and one diagonal heavy duty braces for maximum strength and durability.

It is recommended that wooden gate posts are used when installing these gates. Optional smooth sawn 10cm square pressure treated posts are available.

An optional galvanised fittings pack that includes a Ring Latch and 2 x 18 inch Hook & Band Hinges is also available.

The Drayton Single Gate is available in the following sizes:

  • 75cm Gate Width x 95cm Gate Height - £99.95
  • 90cm Gate Width x 95cm Gate Height - £109.95
  • 105cm Gate Width x 95cm Gate Height - £119.95

If our standard sizes won't fit, a made to measure service is available for this gate. Please click the tab below to be directed to the made to measure page.

View Made to Measure

Specification

SIDE FRAME

70mm x 70mm

BACK BRACING

70mm x 54mm & 44mm x 44mm

TONGUE & GROOVE

95mm x 14mm

JOINTS

Mortise & Tenon

FINISH

Pressure Treated

 

See size chart below to calculate how much space you will require to install your gate when using our 10cm x 10cm concrete in posts.

Gate Width

Expansion Gap

Pair of Posts

Total Gap Required

75cm

1cm

20cm

96cm

90cm

1cm

20cm

111cm

105cm

1cm

20cm

126cm


Information about your gate:

Fittings. The Drayton gates are not supplied with any fittings; however an optional fittings pack is available which includes the correct size hinges and latch for this weight of gate. The fittings we have available are galvanised to prevent rust. The gate has two horizontal braces on the back. Hinges should be fitted to the top and bottom brace.

Wooden Posts. Posts should be dug in approximately 55cm deep and held in place with concrete, or bolted to the wall using masonry bolts or frame fixing screws. A small gap must be left between the post and the gate to allow for expansion of the wood.

Finish. The Drayton gates are supplied pressure treated which leaves the wood with a temporary green tint. If left to weather, the wood will fade to a silvery grey colour; however you can change the colour by painting or staining the wood after it has been allowed to weather for at least 2 months. If you wish to do this, you should use a paint or stain that is compatible with pressure treated timber. 


 Within 10 working days.
 Delivery charges apply to Highlands & Islands.

 FREE
 Surcharge applies for Highlands and Islands

Write a review

Note: HTML is not translated!
    Bad           Good
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.







Add GardenOasis App. Press Then select "Add to Home Screen"