The Quorn Wooden Single Gates are constructed from smooth planed Scandinavian Redwood which has been pressure treated for a long life.
Wooden Gate Posts are recommended when installing this gate. Smooth planed 10cm x 10cm concrete in pressure treated posts are available for £15 per post.
A fittings pack is available for this gate for £11.95 and includes a Ring Latch Set and 2 x 16" Medium Tee Hinges.
| FRAME |
75mm x 75mm |
| TOUNGE & GROOVE |
125mm x 16mm |
| JOINTS |
Mortice & Tenon |
| FINISH |
Pressure Treated |
| OPENING DIRECTION |
Universal |
| WIDTH ADJUSTMENT |
None |
Gate available in the following sizes:
- 75cm (29.5") Gap Width x 90cm (35.5") Gate Height - £89.95
- 90cm (35.5") Gap Width x 90cm (35.5") Gate Height - £89.95
- 102cm (40") Gap Width x 90cm (35.5") Gate Height - £89.95
Specification
See size chart below to calculate how much space you will require to install your gate when using our 10cm x 10cm concrete in posts.
| Gate Width |
Expansion Gap |
Pair of Posts |
Total Gap Required |
| 75cm (29.5") |
1cm |
20cm (8") |
96cm (38") |
| 90cm (35.5") |
1cm |
20cm (8") |
111cm (44") |
| 102cm (40") |
1cm |
20cm (8") |
123cm (48.5") |
Information about your gate
Fittings. All wooden gates require hinges, latch and a fixing kit to attach your gate to timber posts.
Wooden Posts. Concrete in posts must be dug in approximately 45cm deep. A 0.5cm gap much be left between the post and the gate to allow for expansion of the wood.
Finish. All wooden gates are supplied pressure treated which leaves them with a slightly green finish which if left untreated will fade or provides an ideal base for you to stain the timber in a colour of your choice.
|
