Available Options:
| Fittings Pack:
|
| |
| Gate Posts:
|
| |
| Gate Width:
|
| |
| Delivery Time: |
5 to 10 working days |
| Delivery Cost: |
FREE |
| Delivery Notes: |
Delivery charges apply to Highlands & Islands |
| Brand |
BIC |
| Model Number |
BIC700 |
| In Stock |
Yes |
Product Description
The Hampton Single Gate is both elegant and robust thanks to the combined use of quality smooth planed timber and metal rods and spear finials. The timber is Scandinavian Redwood which has been pressure treated for a long maintenance free life and the metalwork is steel that is dipped in black primer ready for you to paint in the colour and finish of your choice.
Wooden gate posts are recommended when installing this gate. Matching smooth planed 10cm x 10cm x 165cm concrete in pressure treated posts are available for £18 per post.
An optional fittings pack is available for this gate for £11.95 which includes a Ring Latch Set and 2 x 16" Medium Tee Hinges.
The Hampton Single Gate is available in the following sizes:
-
75cm Gate Width x 120cm Gate Height - £194.95
-
90cm Gate Width x 120cm Gate Height - £199.95
-
105cm Gate Width x 120cm Gate Height - £204.95
If our standard sizes won't fit, a made to measure service is available for this gate. Please click the tab below to be directed to the made to measure page.
Specification
|
FRAME & STILES |
70mm x 70mm |
|
TONGUE & GROOVE |
95mm x 14mm |
|
INFILL BARS |
12mm Diameter |
|
JOINTS |
Mortise & Tenon |
|
FINISH |
Pressure Treated Timber / Primed Metal |
See size chart below to calculate how much space you will require to install your gate when using our 10cm x 10cm posts.
|
Gate Width |
Expansion Gap |
Pair of Posts |
Total Gap Required |
|
75cm |
1cm |
20cm (10cm x 2) |
96cm |
|
90cm |
1cm |
20cm (10cm x 2) |
111cm |
|
105cm |
1cm |
20cm (10cm x 2) |
126cm |
Information about your gate
Fittings. The Hampton gates are supplied without fittings unless you select the optional fittings pack which includes a ring latch and hinges.
Wooden Posts. Concrete in posts must be dug in approximately 40cm deep. A small gap much be left between the post and the gate to allow for expansion of the wood.
Finish. The Hampton gates are supplied pressure treated which leaves them with a slightly green finish which if left untreated will fade or provides an ideal base for you to stain the timber in a colour of your choice. The metal infill bars and spear finials are dipped in back primer and will require a top coat of suitable exterior metal paint, such as hammerite, to prevent the formation of rust.
