Stirling Single Gate
- Brand: BIC
- Product Code: BIC080
- Availability: In Stock
- WAS: £73.95
Save £10.00 (14%)
The Stirling Single Gate is constructed using solid steel for a traditional wrought iron gate appearance. The decorative scrollwork creates an attractive entrance to your pathway at an affordable price. This gate can be supplied with either a primed or galvanised and powder coated finish.
|FRAME||25mm x 10mm|
|INFILL BARS||10mm Diameter|
|HINGES & LATCH||Included|
|WIDTH TOLERANCE||+/- 10mm|
|FINISH||Black Primed or Galvanised & Powder Coated|
Available in the following options:
- 2ft 6in - Fits gap width 76.2cm (2'6") - Height 91.4cm (36") - £73.95 Sale Price £63.95 - SAVE £10
- 3ft 0in - Fits gap width 91.4cm (3'0") - Height 91.4cm (36") - SOLD OUT
- 3ft 6in - Fits gap width 106.7cm (3'6") - Height 91.4cm (36") - SOLD OUT
- 4ft 0in - Fits gap width 122.0cm (4'0") - Height 91.4cm (36") - SOLD OUT
Galvanised (Zinc Plated & Black Powder Coated) Finish:
If our standard sizes won't fit, a made to measure service is available for this gate.
Gate posts that are designed to be concreted into the ground are also available.
How to Measure Gates
For the width, measure the gap you have between your walls or posts. If you are replacing an existing gate, do not measure the gate itself as this will not take into account the space for the hinges and latch that are supplied with your gate.
For example, if the measurement between your walls is 3ft. You should order the 3ft gate. If you also require posts, the space taken by the posts will be in additional to the gap required for the gate, so a 3ft gate and 2 posts will require a total opening of 3ft 4in.
The height measurement of the gate is from the bottom frame to the highest point in the gate.
When installing your gate, remember to allow for ground clearance, typically 50mm (2") or more if your ground slopes.
Primed. With a primed finish, a black undercoat is applied at the factory. The gate will then need to be painted before installation with a suitable exterior metal paint, such as Hammerite, then repainted every 4 or 5 years to protect the metal. This option allows you to paint the gate in any colour of your choice.
Galvanised & Powder Coated. With this option, the steel is electro-galvanised to add a thin layer of zinc on the steel to prevent rust. The gate is then powder coated in a black paint to give a smooth satin finish. This option allows the gate to be hung straight away and will be maintenance free for 5 to 10 years. Once rust starts to show, the gate should be painted with a suitable exterior metal paint such as Hammerite.
Fittings. The Stirling Single Gate is supplied with hinges, latch and latch keep. Please note the hinges and latch keep require a flat vertical surface for installation.
Opening Directions. The Stirling Single Gate is supplied with a universal latch for left/right hand opening.
Square Steel Posts. Posts are only required if you do not already have walls or posts in place on which to hang the gate.
|Within 10 working days.|
|Delivery charges apply to Highlands & Islands.|
Surcharge applies for Highlands and Islands