Sandringham Curved Railings
- Brand: BIC
- Product Code: BIC114
- Availability: In Stock
- WAS: £199.95
Save £10.00 (5%)
The Sandringham Curved Railings are hand crafted in the UK from solid steel for a traditional wrought iron appearance. The design incorporates hoops and spears to create an elegant yet stately wall mounted railing that will compliment town or country homes.
The Sandringham Curved Railing is made to fit a gap width of 1830mm (6'0"). The railing height is 735mm (29") at the sides dropping to 535mm (21") in the centre.
|FRAME||25mm x 10mm|
|INFILL BARS||12mm Diameter|
Measuring your Railings
For the width, measure the gap you have between your pillars or posts. If you are replacing an existing railing panel, do not measure the railing itself as this will not take into account the space for the hinges that are supplied and required for installation. If you are building a new wall, ensure you leave a gap between your pillars of exactly 1830mm (6ft).
If your gap is more or less than 1830mm (6ft), click on the made to measure button above where you can have the railing made to your exact measurements.
Fittings. The Sandringham Curved Railing is supplied with hinges that require a flat vertical surface for installation.
Finish. The railing is supplied dipped in a black primer ready for you to paint with a top coat in the colour of your choice. We recommend Hammerite but any exterior metal paint can be applied.
|Made to order. Delivered in approximately 3-4 weeks.|
|Delivery charges apply to Highlands & Islands.|
Surcharge applies for Highlands and Islands