Regent Double Gates
- Brand: BIC
- Product Code: BIC012
- Availability: In Stock
The Regent Double Gates are constructed using solid steel with a traditional wrought iron gate appearance. The decorative scrollwork creates an elegant look at an affordable price. The steel used in the manufacture of these driveway gates is electro-galvanised to add a thin layer of zinc on the steel to prevent rust. The gates are then powder coated in a black paint to give a smooth satin finish. This option allows the gates to be installed straight away and will be maintenance free for 5 to 10 years. Once rust starts to show, the gates should be painted with a suitable exterior metal paint such as Hammerite.
|FRAME||25mm x 6mm|
|INFILL BARS||10mm Diameter|
|HINGES & LATCH||Included|
|WIDTH TOLERANCE||+/- 10mm|
|FINISH||Electro Galvanised & Powder Coated|
Available in the following options:
- 7ft - Fits gap width 2134mm (7') - Height 914mm (36") - £149.95
- 8ft - Fits gap width 2438mm (8') - Height 914mm (36") - £159.95
- 9ft - Fits gap width 2743mm (9') - Height 914mm (36") - £174.95
- 10ft - Fits gap width 3048mm (10') - Height 914mm (36") - £189.95
70mm (2.75") square Gate Posts that are designed to be concreted into the ground are available if required.
If you are installing the gates directly onto brickwork, due to the weight of the gates, care should be taken to ensure the brickwork is strong enough to support them. Steel posts which are concreted into the ground are recommended to avoid damage to brickwork.
How to Measure Gates
For the width, measure the gap you have between your walls or posts. If you are replacing an existing gate, do not measure the gate itself as this will not take into account the space for the hinges that are supplied with your gate.
For example, if the measurement between your walls is 10ft. You should order the 10ft gate. If you also require posts, the space taken by the posts will be in additional to the gap required for the gate, so a 10ft gate and 2 posts will require a total opening of 10ft 5.5in.
The height measurement of the gate is from the bottom frame to the highest point on the gate.
When installing your gate, remember to allow for ground clearance, typically 50mm (2") or more if your ground slopes.
Fittings. The Regent Double Gate is supplied with hinges, latch, latch keep and drop bolt.
Opening Directions. The Regent Double Gate can open in either direction. The latch will be supplied on the right hand gate when viewed from the road.
Square Steel Posts. Posts are only required if you do not already have walls or posts in place on which to hang the gate. Please note the hinges require a flat vertical surface for installation.
|Within 10 working days.|
|Delivery charges apply to Highlands & Islands.|
Surcharge applies for Highlands and Islands