Using Store as ADMIN

Manor Flat Top Double Gate

  • Manor Flat Top Double Gate
  • Brand: BIC
  • Product Code: BIC058
  • SKU:
  • Availability: In Stock
  • £169.95


  • Free Delivery*

    Share



The Manor Flat Top Double Gates are constructed using solid steel for a traditional wrought iron gate appearance. The decorative ball finials create an attractive driveway gate at an affordable price. The steel used in the manufacture of these driveway gates is electro-galvanised to add a thin layer of zinc on the steel to prevent rust. The gates are then powder coated in a black paint to give a smooth satin finish. This option allows the gates to be installed straight away and will be maintenance free for 5 to 10 years. Once rust starts to show, the gates should be painted with a suitable exterior metal paint such as Hammerite.

FRAME25mm x 10mm
INFILL BARS12mm Diameter
OPENING DIRECTIONUniversal
PADLOCKABLENo
HINGES & LATCHIncluded
WIDTH TOLERANCE+50mm / -10mm
FINISH OPTIONSGalvanised & Powder Coated

Available in the following options:

  • 7ft - Fits gap width 2134mm (7') - Height 915mm (36") - £169.95
  • 8ft - Fits gap width 2438mm (8') - Height 915mm (36") - £189.95
  • 9ft - Fits gap width 2743mm (9') - Height 915mm (36") - £209.95
  • 10ft - Fits gap width 3048mm (10') - Height 915mm (36") - £229.95
  • 11ft - Fits gap width 3353mm (11') - Height 915mm (36") - £249.95
  • 12ft - Fits gap width 3658mm (12') - Height 915mm (36") - £269.95

If our standard sizes won't fit, a made to measure service is available for this gate.

View Made to Measure

Gate Posts

70mm (2.75") blank square Gate Posts that are designed to be concreted into the ground are also available in a galvanised & powder coated finish.

If you are installing directly onto brickwork, due to the weight of the gates, care should be taken to ensure the brickwork is strong enough to support them. Steel posts which are concreted into the ground are recommended to avoid damage to brickwork.

How to Measure Gates

For the width, measure the gap you have between your walls or posts. If you are replacing an existing gate, do not measure the gate itself as this will not take into account the space for the hinges that are supplied with your gate.

For example, if the measurement between your walls is 10ft. You should order the 10ft gate. If you also require posts, the space taken by the posts will be in additional to the gap required for the gate, so a 10ft gate and 2 posts will require a total opening of 10ft 5.5in.

The height measurement of the gate is from the bottom frame to the highest point on the gate.

When installing your gate, remember to allow for ground clearance, typically 50mm (2") or more if your ground slopes.

General Information

Fittings. The Manor Flat Top Double Gates are supplied with hinges, latch and drop bolt. Please note that the hinges require a flat vertical surface for installation.

Opening Directions. The Manor Flat Top Double Gates can open in both directions. The latch is fitted to the right gate when viewed from the road. The drop bolt is fitted to the left gate.


 Within 10 working days.
 Delivery charges apply to Highlands & Islands.

 FREE
 Surcharge applies for Highlands and Islands

Write a review

Note: HTML is not translated!
    Bad           Good
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.







Add GardenOasis App. Press Then select "Add to Home Screen"