Using Store as ADMIN

Corfe Bow Top Double Gates

  • Corfe Bow Top Double Gates
  • Brand: BIC
  • Product Code: BIC064
  • SKU:
  • Availability: In Stock
  • £574.95

  • Free Delivery*


The Corfe Bow Top Double Gates are made using heavyweight steel for a traditional wrought iron appearance. These high quality gates use a chunky box frame that provides excellent security combined with beautiful design that would compliment the grandest of buildings.

FRAME25mm x 25mm Sides & Base
25mm x 10mm Top
INFILL BARS16mm Diameter
WIDTH TOLERANCE+50mm / -10mm
FINISHBlack primed

Available in the following options:

  • 7ft - Fits gap width 213.4cm (7') - Gate height 208.3cm (82") - £574.95
  • 8ft - Fits gap width 243.8cm (8') - Gate height 208.3cm (82") - £649.95
  • 9ft - Fits gap width 274.3cm (9') - Gate height 208.3cm (82") - £699.95
  • 10ft - Fits gap width 304.8cm (10') - Gate height 208.3cm (82") - £759.95
  • 11ft - Fits gap width 335.3cm (11') - Gate height 208.3cm (82") - £859.95
  • 12ft - Fits gap width 365.8cm (12') - Gate height 208.3cm (82") - £909.95

If our standard sizes won't fit, a made to measure service is available for this gate.

View Made to Measure

Gate posts that are designed to be concreted into the ground and are supplied with the hinges pre-welded to them are available for £120 - Size 10cm (4") square.

How to Measure Gates

For the width, measure the gap you have between your walls or posts. If you are replacing an existing gate, do not measure the gate itself as this will not take into account the space for the hinges that are supplied with your gate.

For example, if the measurement between your walls is 10ft. You should order the 10ft gate. If you also require posts, the space taken by the posts will be in additional to the gap required for the gate, so a 10ft gate and 2 x 4in posts will require a total opening of 10ft 8in.

The height measurement of the gate is from the bottom frame to the highest point on the gate.

When installing your gate, remember to allow for ground clearance, typically 50mm (2") or more if your ground slopes.

General Information

Fittings. The Corfe Bow Top Double Gates are supplied with hinges, latch and two drop bolts. Please note that the hinge plates require a flat vertical surface for installation

Opening Directions. The Corfe Bow Top Double Gates can open in both directions. The latch is fitted to the right gate when viewed from the road.

Square Steel Posts. If you are installing directly onto brickwork, due to the weight of the gates, care should be taken to ensure the brickwork is strong enough to support them. Steel posts which are concreted into the ground are recommended to avoid damage to brickwork. .

Finish. The Corfe Bow Top Double Gates are supplied dipped in a black primer ready for you to paint with a top coat in the colour of your choice. We recommend Hammerite but any exterior metal paint can be applied.

 Made to order. Delivered in approximately 3-4 weeks.
 Delivery charges apply to Highlands & Islands.

 Surcharge applies for Highlands and Islands

Write a review

Note: HTML is not translated!
    Bad           Good

You Might Also Like

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Add GardenOasis App. Press Then select "Add to Home Screen"