The Sunda Wall Tank from Garantia is a stylish and sustainable way to collect rainwater for your gardening needs. Designed to resemble a mocha brown rattan panel, this slimline water butt is the ideal choice for complimenting your garden, especially any existing rattan patio furniture. Connecting directly into your house downpipe (connection not included) and manufactured from 100% recycled materials with a brown rattan effect finish, the Sunda Wall Tank comes complete with a threaded connection enabling quick installation of the included water tap without the need for drilling. Manufactured in Germany using 100% recycled material provides a durable and robust water tank with a generous capacity of 300 litres, this water butt strikes the perfect balance between functionality and a space-saving design.

Supplied with a 5 year manufacturers warranty. Minimal home assembly required.

• Designed to resemble a rattan panel
• High capacity slim design takes up less space on your patio
• Perfect for rainwater harvesting
• Capacity - 300 Litres
• Wind protection and inlet seal DN 19/32
• Designed to connect to your house downpipe
• Threaded tap connection allows for easy tap installation (1 x tap included)
• Water can be extracted with ease using the tap supplied
• Residual water can be drained easily via the drain plug at the base
• Manufactured from durable and robust recycled materials
• Manufacturers 5 year warranty

Height: 118cm
Width: 80cm
Depth: 40cm
Weight: 16kg

Please Note: Downpipe filter not included, available to purchase separately.

Connecting to a Downpipe

The water butt does not come predrilled to connect to a downpipe. This is very easy to do, simply attach the drill bit onto your drill and begin drilling – remember you must drill the hole in the water butt at the same level as the hole in the downpipe. As long as the holes drilled in both the water butt and the downpipe are level, the water will continue down the downpipe when the water butt is full.

Delivery

This item is delivered on a non returnable pallet. The pallet is unloaded from the delivery vehicle using a tail lift and a hand pump truck which requires a flat, firm surface for unloading. In some cases, this may mean kerbside delivery only. Please make us aware of any vehicle access restrictions such as height, width or weight limits as failed deliveries due to access issues may incur a failed delivery charge.

Q) Can this water butt be placed directly on the ground? 
A) Yes this water butt is designed to sit directly on the ground as the tap is located approx. 30cm from the bottom to enable a watering can to be used underneath. This also means that some water is always left in the water butt to help keep this stable.

Q) Can the water feed from the downpipe be fitted on either side of the water butt or not?
A) The downpipe filter or diverter can be installed from either side.

Q) How thick are the walls of the water butt?
A) The walls inside are not too thick so the drill piece can go through easily. No thicker than a few CM's.

Q) Are there any care instructions for this water butt? 
A) It is good practice to empty water butts/tanks regularly to clean the interior to remove sludge, algae and slime that can build up and effect water quality over time. During the winter it is advised to drain the water butt/tank to avoid freezing which could crack and split the water butt/tank in low temperatures. All Garantia water butts/tanks come with a plug at the bottom to allow for easy emptying. When empty the drainpipe connection should be closed and the tap should be left on open.