The Rocky Wall Water Tank from Garantia is designed to resemble a brick wall, offering a themed alternative to collecting and storing rainwater compared to a standard garden water butt. Each Rocky Wall Water Tank is unique due to the individual manufacturing process, and is designed to collect water from a roof downpipe for an easy and sustainable way to collect rainwater for your garden watering needs. This tank features two brass thread connections of 3/4" for easy installation of the tap and extraction hose (not included) and with a generous capacity of 400 litres, the Rocky Wall Water Tank provides ample storage for your rainwater harvesting needs. Manufactured in Germany from a portion of recycled materials, this durable and robust water tank with a brick effect finish strikes the perfect balance between functionality and a space-saving design.

Available in a choice of colours. Supplied with a 5 year manufacturers warranty. Minimal home assembly required.

• Designed to resemble a brick wall
• Perfect for rainwater harvesting and garden decoration
• 400 Litre capacity
• 3 colours available - Sand Stone, Red Stone or Dark Granite
• Large capacity water storage in a compact design
• Two brass thread connections enables easy tap installation (tap not included)
• Designed to connect to your house downpipe
• Drilling required for downpipe hose connection
• Residual water can be drained easily via the drain plug at the base
  
• Manufactured from some recycled materials
• Manufacturers 5 year warranty 

Height: 100cm
Width: 120cm
Depth: 40cm
Weight: 35kg

Please Note: Downpipe filter not included, available to purchase separately.

Connecting to a Downpipe

The water butt does not come predrilled to connect to a downpipe. This is very easy to do, simply attach the drill bit onto your drill and begin drilling – remember you must drill the hole in the water butt at the same level as the hole in the downpipe. As long as the holes drilled in both the water butt and the downpipe are level, the water will continue down the downpipe when the water butt is full.

Delivery

This item is delivered on a non returnable pallet. The pallet is unloaded from the delivery vehicle using a tail lift and a hand pump truck which requires a flat, firm surface for unloading. In some cases, this may mean kerbside delivery only. Please make us aware of any vehicle access restrictions such as height, width or weight limits as failed deliveries due to access issues may incur a failed delivery charge.

Q) Can this water butt be placed directly on the ground? 
A) Yes this water butt is designed to sit directly on the ground as the tap is located approx. 30cm from the bottom to enable a watering can to be used underneath. This also means that some water is always left in the water butt to help keep this stable.

Q) Can the water feed from the downpipe be fitted on either side of the water butt or not?
A) The downpipe filter or diverter can be installed from either side.

Q) How thick are the walls of the water butt?
A) The walls inside are not too thick so the drill piece can go through easily. No thicker than a few CM's.

Q) Are there any care instructions for this water butt? 
A) It is good practice to empty water butts/tanks regularly to clean the interior and remove sludge, algae and slime that can build up and effect water quality over time. During the winter it is advised to drain the water butt/tank to avoid freezing which could crack and split the water butt/tank in low temperatures. All Garantia water butts/tanks come with a plug at the bottom to allow for easy emptying. When empty the drainpipe connection should be closed and the tap should be left on open.