The Linus Water Butt And Planter from Garantia is designed to enhance your garden with functionality, while its overall appearance is disguised with an integrated planter, allowing you to customise your water butt and fill with your favourite flowers. With a generous capacity of 220 litres this elegant water butt features a ridged pattern and provides an alternative way of collecting and storing rainwater as it is designed to connect to your house downpipe (connection not included) for an easy and sustainable way to harvest rainwater for your garden watering needs. Two integrated threads enable quick installation of the included chrome water tap without the need for drilling, and is complete with the removable planter in the top making planting as easy as possible and allowing for the inside of the tank to be cleaned regularly. Watering of the planter separately may be required as it may be above the water butts water level. Manufactured from durable and robust recycled materials this exquisite water butt strikes the perfect balance between appearance and functionality.

Supplied with a 5 year manufacturers warranty. Minimal home assembly required.

• Modern ridged design in zinc grey
  
• Perfect for rainwater harvesting and garden decoration
• Generous 220 Litre capacity
• Integrated removable planter - depth of 20 cm, plant fleece included
• Two integrated threads allow for easy tap installation (1 x tap included)
• Easy water extraction using the chrome tap supplied
• Designed to connect to your house downpipe
• Drilling required for downpipe hose connection
• Residual water can be drained easily via the drain plug at the base
  
• Manufactured from durable and robust recycled materials
• Manufacturers 5 year warranty

Height: 120cm
Top Diameter: 58cm
Base Diameter: 40cm
Weight: 15kg

Please Note: Downpipe filter not included, available to purchase separately.

Connecting to a Downpipe

The water butt does not come predrilled to connect to a downpipe. This is very easy to do, simply attach the drill bit onto your drill and begin drilling – remember you must drill the hole in the water butt at the same level as the hole in the downpipe. As long as the holes drilled in both the water butt and the downpipe are level, the water will continue down the downpipe when the water butt is full.

Delivery

This item is delivered on a non returnable pallet. The pallet is unloaded from the delivery vehicle using a tail lift and a hand pump truck which requires a flat, firm surface for unloading. In some cases, this may mean kerbside delivery only. Please make us aware of any vehicle access restrictions such as height, width or weight limits as failed deliveries due to access issues may incur a failed delivery charge.

Q) Can this water butt be placed directly on the ground?
A) Yes this water butt is designed to sit directly on the ground as the tap is located approx. 30cm from the bottom to enable a watering can to be used underneath. This also means that some water is always left in the water butt to help keep this stable.

Q) Can the water feed from the downpipe be fitted on either side of the water butt or not?
A) The downpipe filter or diverter can be installed from either side.

Q) How thick are the walls of the water butt?
A) The walls inside are not too thick so the drill piece can go through easily. No thicker than a few CM's.

Q) Are there any care instructions for this water butt?
A) It is good practice to empty water butts/tanks regularly to clean the interior to remove sludge, algae and slime that can build up and effect water quality over time. During the winter it is advised to drain the water butt/tank to avoid freezing which could crack and split the water butt/tank in low temperatures. All Garantia water butts/tanks come with a plug at the bottom to allow for easy emptying. When empty the drainpipe connection should be closed and the tap should be left on open.