Introducing the 2-in-1 Decorative Water Butt and Planter from Garantia – a stunning solution for rainwater harvesting and garden decoration. Designed to collect water from a roof downpipe (connection not included) this high-quality tank features an integrated planter, allowing you to grow flowers and store water to keep the plants in your garden naturally hydrated. Made using 100% recycled materials, it's both durable and eco-friendly. Harvest rainwater, save money on water bills, and enjoy the convenience of the included tap at a convenient height for filling the watering can. With a generous capacity of 250 litres, the Decorative Water Butt and Planter offers ample storage for your rainwater harvesting needs. Measuring  62cm in diameter and 145cm in height, it strikes the perfect balance between functionality and space-saving design.

Available in a choice of 2 colours, this water butt is supplied with a 5 year manufacturers warranty. Minimal home assembly required. 

• Every tank is unique thanks to the special production process
• Integrated 20cm deep planter bowl with filter fleece included.
• Water can be extracted with ease using the tap supplied

Dimensions

Height: 145cm
Diameter at widest point: 62cm
Weight: 12kg

Please Note: Downpipe filter not included, available to purchase separately.

Connecting to a Downpipe

The water butt does not come predrilled to connect to a downpipe. This is very easy to do, simply attach the drill bit onto your drill and begin drilling – remember you must drill the hole in the water butt at the same level as the hole in the downpipe. As long as the holes drilled in both the water butt and the downpipe are level, the water will continue down the downpipe when the water butt is full.

Delivery

This item is delivered on a non returnable pallet. The pallet is unloaded from the delivery vehicle using a tail lift and a hand pump truck which requires a flat, firm surface for unloading. In some cases, this may mean kerbside delivery only. Please make us aware of any vehicle access restrictions such as height, width or weight limits as failed deliveries due to access issues may incur a failed delivery charge.

Q) Can this water butt be placed directly on the ground? 
A) Yes this water butt is designed to sit directly on the ground as the tap is located approx. 30cm from the bottom to enable a watering can to be used underneath. This also means that some water is always left in the water butt to help keep this stable.

Q) Can the water feed from the downpipe be fitted on either side of the water butt or not?
A) The downpipe filter or diverter can be installed from either side.

Q) How thick are the walls of the water butt?
A) The walls inside are not too thick so the drill piece can go through easily. No thicker than a few CM's. 

Q) Are there any care instructions for this water butt? 
A) It is good practice to empty water butts/tanks regularly to clean the interior and remove sludge, algae and slime that can build up and effect water quality over time. During the winter it is advised to drain the water butt/tank to avoid freezing which could crack and split the water butt/tank in low temperatures. All Garantia water butts/tanks come with a plug at the bottom to allow for easy emptying. When empty the drainpipe connection should be closed and the tap should be left on open.