The Modular Pergola from Forest is the perfect size for creating a flexible and contemporary outdoor seating area in your garden. This sturdy structure is just under 2m square which is ideal for those smaller spaces or unused corners. This Modular Pergola is open on all sides and features two slatted roof panels that offer a degree of shade while the pergola creates an attractive focal point in your garden space for a seating area, rockery or a water feature. The beams provide support for hanging baskets, storm lanterns or decorative lighting. Delivered flat packed with instructions included for home assembly.

The pergola can be positioned on a hard standing or soft ground but whatever surface you choose it is recommended that the pergola is anchored to the ground, using either an Easy-Fit Fencebase for hard standing (product code FGP431-size 65mm x 80mm) or Easy-Fit Fencefast for soft ground (product code FGP432- size 750mm x 65mm). These will need to be purchased separately as they are not included.

Manufactured in Poland from PEFC certified timber from sustainable sources the softwood, pressure treated timber gives a natural wooden finish and is supplied with a 15 year anti-rot guarantee thereby eliminating the need for annual re-treatment.

• Contemporary design
• Home assembly required
• PEFC Certified timber
• Maintenance free
• Pressure treated finish
• 15 Year anti-rot guarantee
• Made in Poland

Dimensions

Width: 197cm (77.5in)
Depth: 197cm (77.5in)
Height: 204.5cm (80.5in)
Weight: 146kg

Footprint Dimensions

Width at base: 191cm (75in)
Depth at base: 191cm (75in)

The Modular Pergola is available in a range of different options. Click below to view the full range.

Click Here To View Modular Pergola Range

Warranty & Maintenance

This item is pressure treated with a 15 year manufacturers anti rot guarantee. The pressure treatment will leave the item with a pale green finish that allows the natural beauty of the wood to show through and over time if left this will weather to an attractive silver/grey finish. This is perfectly natural and does not affect the structure of the product. Alternatively the pressure treated finish creates a good foundation for colouring to suit your personal taste. If you do decide to paint or stain this item it is advisable to allow the wood to weather for 2-3 months to avoid trapping any residual chemicals from the pressure treated process. Any paint or stain you use must then be suitable for pressure treated timber. Please note natural splitting and cracking may occur but will not affect the longevity nor structure of the product.