The Manor Double Gates are constructed using solid steel for a traditional wrought iron gate appearance. The decorative ball finials create an attractive driveway gate at an affordable price.
| FRAME |
25mm x 10mm |
| INFILL BARS |
12mm Diameter |
| OPENING DIRECTION |
Universal |
| PADLOCKABLE |
No |
| HINGES/LATCH/FITTINGS |
Included |
| WIDTH TOLERANCE |
+50mm / -10mm |
| FINISH |
Black primed |
Available in the following options:
- 7ft - Fits gap width 2134mm (7') - Height 1219mm (48") - £319.95
- 8ft - Fits gap width 2438mm (8') - Height 1219mm (48") - £359.95
- 9ft - Fits gap width 2743mm (9') - Height 1219mm (48") - £419.95
- 10ft - Fits gap width 3048mm (10') - Height 1219mm (48") - £479.95
- 11ft - Fits gap width 3353mm (11') - Height 1219mm (48") - £559.95
- 12ft - Fits gap width 3658mm (12') - Height 1219mm (48") - £629.95
Please note: Gate centre height 1219mm (48"), side frame height 813mm (32")
Gate posts also available for £39 each - Size 70mm (3") square
How to Measure Gates
For the width, measure the gap you have between your walls or posts. If you are replacing an existing gate, do not measure the gate itself as this will not take into account the space for the hinges that are supplied with your gate.
For example, if the measurement between your walls is 10ft. You should order the 10ft gate. If you also require posts, the space taken by the posts will be in additional to the gap required for the gate, so a 10ft gate and 2 x 3in posts will require a total opening of 10ft 6in.
The height measurement of the gate is from the bottom frame to the highest point on the gate.
When installing your gate, remember to allow for ground clearance, typically 50mm (2") or more if your ground slopes.
General Information
Fittings. The Manor Double Gates are supplied with hinges, latch and drop bolt. Self tapping screws are also included.
Opening Directions. The Manor Double Gates can open in both directions. The latch is fitted to the right gate when viewed from the road. The drop bolt is fitted to the left gate.
Square Steel Posts. If you are installing directly onto brickwork, due to the weight of the gates, care should be taken to ensure the brickwork is strong enough to support them. Steel posts which are concreted into the ground are recommended to avoid damage to brickwork. Please note that the hinges require a flat vertical surface for installation.
Finish. The Manor Double Gates are supplied dipped in a black primer ready for you to paint with a top coat in the colour of your choice. We recommend Hammerite but any exterior metal paint can be applied.
|
