Edinburgh Tall Single Gates

  • Edinburgh Tall Single Gates
  • Brand: BIC
  • Product Code: BIC022
  • SKU:
  • Availability: In Stock

The Edinburgh Tall Single Gate is constructed using solid steel giving a traditional wrought iron appearance. The decorative scrollwork creates an attractive gate that can be padlocked for security.

FRAME25mm x 6mm
INFILL BARS10mm Diameter
OPENING DIRECTIONUniversal
PADLOCKABLEYes
HINGES & LATCHIncluded
WIDTH TOLERANCE+/- 10mm
FINISHBlack primed

Available in the following options:

  • 3ft 0in - Fits gap width 91.4cm (3'0") - Height 198cm (78") - £149.95
  • 3ft 6in - Fits gap width 106.7cm (3'6") - Height 198cm (78") - £169.95
  • 4ft 0in - Fits gap width 122.0cm (4'0") - Height 198cm (78") - £189.95

If our standard sizes won't fit, a made to measure service is available for this gate.

View Made to Measure

Gate posts that are designed to be concreted into the ground and are supplied with the hinges and latch keep pre-welded to them are available for £48 - Size 50mm (2") square

How to Measure Gates

For the width, measure the gap you have between your walls or posts. If you are replacing an existing gate, do not measure the gate itself as this will not take into account the space for the hinges and latch that are supplied with your gate.

For example, if the measurement between your walls is 3ft. You should order the 3ft gate. If you also require posts, the space taken by the posts will be in additional to the gap required for the gate, so a 3ft gate and 2 x 2in posts will require a total opening of 3ft 4in.

The height measurement of the gate is from the bottom frame to the highest point in the gate.

When installing your gate, remember to allow for ground clearance, typically 50mm (2") or more if your ground slopes.

General Information

Fittings. The Edinburgh Tall Single Gate is supplied with hinges, latch and latch keep. Please note the hinges and latch keep require a flat vertical surface for installation.

Opening Directions. The Edinburgh Tall Single Gate is supplied with a universal latch for left/right hand opening.

Square Steel Posts. Posts are only required if you do not already have walls or posts in place on which to hang the gate.

Finish. The Edinburgh Tall Single Gate is supplied dipped in a black primer ready for you to paint with a top coat in the colour of your choice. We recommend Hammerite but any exterior metal paint can be applied.


 Within 10 working days.
 Delivery charges apply to Highlands & Islands.

 FREE
 Surcharge applies for Highlands and Islands

Write a review

Note: HTML is not translated!
    Bad           Good

You Might Also Like

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.