The wrought iron style Estate Fence Panels are constructed using sturdy steel with a simple design which makes them more cost effective when fencing in large estates and parks. The width of the panels is easily adjustable, thanks to a frame that can be removed at one end, allowing the horizontal bars to be cut to the length required to finish your run. The frame of the panels can be bolted directly to a wall or fence posts.

The steel used in the manufacture of this fence panel is electro-galvanised to add a thin layer of zinc on the steel to prevent rust. The railing is then powder coated in a black paint to give a smooth satin finish. This option allows the railing to be installed straight away and provides protection against rust for up to 10 years. Once rust starts to show, they should be painted with a suitable exterior metal paint such as Hammerite.

50mm square Fence Posts that can either be concreted into the ground or bolted down are also available.

Specification

How to Measure Fencing

The fence panel width measurement of 200cm is the width of the panel excluding posts. Therefore this measurement is the actual gap width that is required by one panel. The height measurement is taken from the lowest to highest point on the fence which in this case is the top and bottom of the vertical bars.

General Information

Fittings: The Estate Fence Panels are supplied with bolts to attach to the optional steel posts. They can be fitted to any wall or post with a flat vertical surface using your own suitable fittings.