This 50mm (2") square metal post is designed for use with the Abbey Fence Panel. The posts are blank, giving you flexibility on the positioning of your fittings. The posts are supplied with self-drilling TEK screws that allow you to attach your fittings to the posts in the required position without needing to pre-drill holes, thereby allowing the post to be used as a corner, end or an in-line post. The posts are zinc plated to prevent rust and have a black powder coated finish.

Available in the following options:

• 2" x 55" (50mm x 1400mm) Concrete-In Post
  
• 2" x 38" (50mm x 960mm) Bolt Down Post

These posts are only compatible with our standard size panels or made to measure panels made up to the standard height of 32" (815mm). If you are ordering made to measure panels taller than the standard height, please order made to measure posts.

Please ensure that the bolt down railing or fence posts are installed so the bolt down footplate runs at a 90o angle to the railing.

The steel is electro-galvanised to add a thin layer of zinc on the steel to prevent rust. The post is then powder coated in a black paint to give a smooth satin finish. This allows the post to be installed straight away and will be maintenance free for 5 to 10 years. Once rust starts to show, the post should be painted with a suitable exterior metal paint such as Hammerite.