Drive In 24" Strap Gate Fixing Kit

The Drive In Strap Gate Fixing Kit from Eliza Tinsley is designed for use with wooden gates that are being attached to wooden posts between 100mm (4") and 150mm (6") square. The set consists of a Bolt-Through Hinge Pin plus Long Strap Hinge that you attach to the top rail of the gate and a Hammer-In Hinge Pin plus short Strap Hinge that you attach towards the bottom of the gate. The fittings are made from strong steel with a galvanised finish to prevent rust.

Fittings Pack Contents

• 1 x 19mm (0.75") Diameter Bolt-Through Hinge Pin
  
• 1 x 19mm (0.75") Diameter Hammer-In Hinge Pin
  
• 1 x 609mm (24") Long Strap Hinge
  
• 1 x 125mm (5") Short Strap Hinge 
  
• 4 x Coach Bolts
  
• 2 x Screws