Dover Aluminium Single Gate

The Dover Single Gate from Castle Gates is a solid aluminium pedestrian gate that offers full privacy. It is supplied with a key operated mortice lock that offers excellent security. Being made from aluminium, it is both robust and lightweight whilst being resistant to rust thereby requiring virtually no maintenance, simply clean with soapy water when required to keep the gate looking new. The Dover design has the traditional vertical infill panels and is available with either a black or grey powder coated finish (bespoke colours available upon request).

The gate is supplied with hinges, mortice lock and keys, a full length wall mounted latch & lock keep for added privacy, expanding bolts and screws.

• Made from weather resistant aluminium
• Powder coated finish
• Maintenance free
• Excellent privacy and security
• Five year manufacturers guarantee

The Dover Single Gate is available in the following sizes:

100mm square aluminium Gate Posts that are designed to be concreted into the ground are also available.

How to Measure Aluminium Gates

The width measurements are the actual width of the gate. When installing the gate, the overall gap required needs to be between 3cm and 5cm wider than the gate to allow space for the hinges and latch keep.

See the size chart below to see how much space you need to install the gate using the hinges and latch supplied.

* The hinges are adjustable and require from 1 to 3cm. The latch requires 2cm.

The height measurement of the gate is taken from the bottom to the top of the side frame. Your post or pillar should be at least 10cm longer overall than the gate to allow for the hinges to be fitted. The hinge plates will sit 5cm above and 5cm below the gate. 

General Information

Fittings. The Dover Tall Single Gate is supplied with hinges, door handles, mortice lock with keys and latch keep. Please note the hinges and latch keep require a flat vertical surface for installation and are supplied black in colour.

Opening Direction. The Dover Tall Single Gate is supplied with universal fittings that allows the gate to be hung on the left or right and the latch keep can be set to allow the gate to open either towards or away from you.

Gate Posts. Posts are only required if you do not already have walls or posts in place on which to hang the gate.

Standard colours available: Black and Grey. Bespoke colours available upon request.