Weston Galvanised Tall Single Gate

The Weston Tall Single Gates are constructed from solid steel with a traditional wrought iron appearance. The gates are electrogalvanised for corrosion resistance and finished with a black powder coat, so there is no need to paint your gate. The gate is supplied with adjustable hinges and universal latch that can be padlocked for security.

 

FRAME	25mm x 8mm
INFILL BARS	12mm Diameter
OPENING DIRECTION	Universal
PADLOCKABLE	Yes
HINGES/LATCH/FITTINGS	Included
FINISH	Galvanised & Black Powder Coated

 

Available in the following options:

• Weston Size B - Fits gap widths of 850-920mm (33.5-36") - Gate height 1897mm (75") - £179.95
• Weston Size C - Fits gap widths of 920-990mm (36-39") - Gate height 1897mm (75") - £194.95

Galvanised and powder coated concrete-in gate posts also available for £35 each - Size 50mm (2") square

How to Measure Gates

For the width, measure the gap you have between your walls or posts. If you are replacing an existing gate, do not measure the gate itself as this will not take into account the space for the hinges and latch that are supplied with your gate.

Example 1: You have a two brick pillars already in place. The measurement between them is 860mm. You should therefore order gate size 'B'

Example 2: You do not have any pillars or posts already in place. The overall gap you want to fill is 1000mm. You need two posts (50mm + 50mm) leaving you with a gap of 900mm for the gate. You should therefore order gate size 'B'.

The height measurement of the gate is from the bottom frame to the highest point in the gate.

When installing your gate, remember to allow for ground clearance, typically 50mm (2") or more if your ground slopes.