The Stirling Bow Top Gate is constructed using solid steel giving a traditional wrought iron appearance. The decorative scrollwork creates an attractive gate that can be padlocked for security.
| FRAME |
20mm x 6mm |
| INFILL BARS |
10mm Diameter |
| OPENING DIRECTION |
Universal |
| PADLOCKABLE |
Yes |
| HINGES/LATCH/FITTINGS |
Included |
| WIDTH TOLERANCE |
+/- 10mm |
| FINISH |
Black primed |
Available in the following options:
- 2ft 6in - Fits opening 76.2cm (2'6") - Height 175.3cm (69") - £119.95
- 3ft 0in - Fits opening 91.4cm (3'0") - Height 183.0cm (72") - £129.95
- 3ft 6in - Fits opening 106.7cm (3'6") - Height 190.5cm (75") - £149.95
- 4ft 0in - Fits opening 122.0cm (4'0") - Height 198.1cm (78") - £169.95
Gate posts also available for £40 each - Size 70mm (3") square 
How to Measure Gates
For the width, measure the gap you have between your walls or posts. If you are replacing an existing gate, do not measure the gate itself as this will not take into account the space for the hinges and latch that are supplied with your gate.
For example, if the measurement between your walls is 3ft. You should order the 3ft gate. If you also require posts, the space taken by the posts will be in additional to the gap required for the gate, so a 3ft gate and 2 three inch posts will require a total opening of 3ft 6in.
The height measurement of the gate is from the bottom frame to the highest point of the gate.
When installing your gate, remember to allow for ground clearance, typically 50mm (2") or more if your ground slopes.
General Information
Fittings. The Stirling Bow Top Gate is supplied with hinges, latch and striker plate. Self tapping screws are also included.
Opening Directions. The Stirling Bow Top Gate is supplied with a universal latch for left/right hand opening.
Square Steel Posts. Posts are only required if you do not already have walls or posts in place on which to hang the gate. Please note the hinges and striker require a flat vertical surface for installation.
Finish. The Stirling Bow Top Gate is supplied dipped in a black primer ready for you to paint with a top coat in the colour of your choice. We recommend Hammerite but any exterior metal paint can be applied.
|
