The Saxon Tall Single Gate is constructed using solid steel giving a traditional wrought iron appearance. The decorative spear finials create an attractive gate that can be padlocked for security.
| FRAME |
25mm x 10mm |
| INFILL BARS |
12mm Diameter |
| OPENING DIRECTION |
Universal |
| PADLOCKABLE |
Yes |
| HINGES/LATCH/FITTINGS |
Included |
| WIDTH TOLERANCE |
+/- 10mm |
| FINISH |
Black primed |
Available in the following options:
- 2ft 6in - Fits gap width 762mm (2'6") - Height 1980mm (78") - £154.95
- 3ft 0in - Fits gap width 914mm (3'0") - Height 1980mm (78") - £164.95
- 3ft 6in - Fits gap width 1067mm (3'6") - Height 1980mm (78") - £174.95
- 4ft 0in - Fits gap width 1220mm (4'0") - Height 1980mm (78") - £184.95
Gate posts also available for £45 each - Size 70mm (3") square
How to Measure Gates
For the width, measure the gap you have between your walls or posts. If you are replacing an existing gate, do not measure the gate itself as this will not take into account the space for the hinges and latch that are supplied with your gate.
For example, if the measurement between your walls is 3ft. You should order the 3ft gate. If you also require posts, the space taken by the posts will be in additional to the gap required for the gate, so a 3ft gate and 2 x 3in posts will require a total opening of 3ft 6in.
The height measurement of the gate is from the bottom frame to the highest point in the gate.
When installing your gate, remember to allow for ground clearance, typically 50mm (2") or more if your ground slopes.
General Information
Fittings. The Saxon Tall Single Gate is supplied with hinges, latch and striker plate. Self tapping screws are also included.
Opening Directions. The Saxon Tall Single Gate is supplied with a universal latch for left/right hand opening.
Square Steel Posts. Posts are only required if you do not already have walls or posts in place on which to hang the gate. Please note the hinges and striker require a flat vertical surface for installation.
Finish. The Saxon Tall Single Gate is supplied dipped in a black primer ready for you to paint with a top coat in the colour of your choice. We recommend Hammerite but any exterior metal paint can be applied.
|
