The Sandringham Single Gate is hand crafted from solid steel for a traditional wrought iron appearance. The design incorporates hoops and spears to create an elegant yet stately gate that will compliment town or country homes. The gate can also be padlocked for security.
|
SIDE FRAME |
25mm x 10mm |
|
TOP / BOTTOM FRAME |
25mm x 10mm |
|
INFILL BARS |
12mm Diameter |
|
OPENING DIRECTION |
Hinged on left. Opening away from the road |
|
PADLOCKABLE |
Yes |
|
HINGES/LATCH/FITTINGS |
Included |
|
WIDTH TOLERANCE |
+50mm / -10mm |
|
FINISH |
Black primed |
Available in the following options:
-
3ft 0in - Fits gap width 91.4cm (3'0") - Gate height 190.5cm (75") - £279.95
-
3ft 6in - Fits gap width 106.7cm (3'6") - Gate height 190.5cm (75") - £319.95
-
4ft 0in - Fits gap width 121.9cm (4'0") - Gate height 190.5cm (75") - £359.95
Gate hinge & latch posts available for £49 - Size 7cm (3") square
How to Measure Gates
For the width, measure the gap you have between your walls or posts. If you are replacing an existing gate, do not measure the gate itself as this will not take into account the space for the hinges and latch that are supplied with your gate.
For example, if the measurement between your walls is 3ft. You should order the 3ft gate. If you also require posts, the space taken by the posts will be in additional to the gap required for the gate, so a 3ft gate and 2 x 3in posts will require a total opening of 3ft 6in.
The height measurement of the gate is from the bottom frame to the highest point in the gate.
When installing your gate, remember to allow for ground clearance, typically 50mm (2") or more if your ground slopes.
If our standard sizes will not fit, a made to measure service is available for this gate. Click the button below to be redirected to the made to measure page.
General Information
Fittings. The Sandringham Tall Single Gate is supplied with hinges, latch and striker plate. Self tapping screws are also included.
Opening Direction. The Sandringham Tall Single Gate is designed to be hinged on the left side as you look toward the house from the road and opening on the right side, swinging away from the road.
Square Steel Posts. If you are installing directly onto brickwork, due to the weight of the gates, care should be taken to ensure the brickwork is strong enough to support them. Steel posts which are concreted into the ground are recommended to avoid damage to brickwork. Please note that the hinge plates require a flat vertical surface for installation.
Finish. The Sandringham Tall Single Gate is supplied dipped in a black primer ready for you to paint with a top coat in the colour of your choice. We recommend Hammerite but any exterior metal paint can be applied.
