The Regent Double Gates are constructed using solid steel for a traditional wrought iron gate appearance. The decorative scrollwork creates an elegant look at an affordable price.
| FRAME |
25mm x 6mm |
| INFILL BARS |
10mm Diameter |
| OPENING DIRECTION |
Universal |
| PADLOCKABLE |
No |
| HINGES/LATCH/FITTINGS |
Included |
| WIDTH TOLERANCE |
+/- 10mm |
| FINISH |
Black primed |
Available in the following options:
- 7ft - Fits gap width 2134mm (7') - Height 914mm (36") - £124.95
- 8ft - Fits gap width 2438mm (8') - Height 914mm (36") - £134.95
- 9ft - Fits gap width 2743mm (9') - Height 914mm (36") - £144.95
- 10ft - Fits gap width 3048mm (10') - Height 914mm (36") - £154.95
Gate posts also available for £35 each - Size 70mm (3") square
How to Measure Gates
For the width, measure the gap you have between your walls or posts. If you are replacing an existing gate, do not measure the gate itself as this will not take into account the space for the hinges and latch that are supplied with your gate.
For example, if the measurement between your walls is 10ft. You should order the 10ft gate. If you also require posts, the space taken by the posts will be in additional to the gap required for the gate, so a 10ft gate and 2 posts will require a total opening of 10ft 6in.
The height measurement of the gate is from the bottom frame to the highest point in the gate.
When installing your gate, remember to allow for ground clearance, typically 50mm (2") or more if your ground slopes.
General Information
Fittings. The Regent Double Gate is supplied with hinges, latch and drop bolt. Self tapping screws are also included.
Opening Directions. The Regent Double Gate can open in either direction. The latch will be supplied on the right hand gate when viewed from the road.
Square Steel Posts. Posts are only required if you do not already have walls or posts in place on which to hang the gate. Please note the hinges require a flat vertical surface for installation.
Finish. The Regent Double Gate is supplied dipped in a black primer ready for you to paint with a top coat in the colour of your choice. We recommend Hammerite but any exterior metal paint can be applied.
|
