Quorn Driveway Gates

The Quorn Driveway Gates are crafted in the UK using quality smooth planed Scandinavian Redwood which has been pressure treated for a long maintenance free life. The design of the gate creates a robust yet stylish entrance to your driveway.

Wooden gate posts are recommended when installing these gate. Matching smooth planed 12.5cm x 12.5cm x 135cm concrete in pressure treated posts are available for £17.50 per post

An optional fittings pack is available for these gates for £59.95 which includes a Ring Latch Set and 4 x Hinges Bands, 4 x Screw-On Hinge Plates and an 18" drop bolt set.

The Quorn Driveway Gates are available in the following sizes:

• 240cm Gate Width x 90cm Gate Height - £269.95
• 270cm Gate Width x 90cm Gate Height - £299.95
• 300cm Gate Width x 90cm Gate Height - £329.95
• 360cm Gate Width x 90cm Gate Height - £379.95

If our standard sizes won't fit, a made to measure service is available for this gate. Please click the tab below to be directed to the made to measure page.

Specification

FRAME & STILES	70mm x 70mm
TONGUE & GROOVE	95mm x 14mm
JOINTS	Mortise & Tenon
FINISH	Pressure Treated Timber

See size chart below to calculate how much space you will require to install your gate when using our 12.5cm x 12.5cm posts.

Gate Width	Expansion Gap	Pair of Posts	Total Gap Required
240cm	2cm	25cm (12.5cm x 2)	267cm
270cm	2cm	25cm (12.5cm x 2)	297cm
300cm	2cm	25cm (12.5cm x 2)	327cm
360cm	2cm	25cm (12.5cm x 2)	387cm

Information about your gate

Fittings. The Quorn gates are supplied without fittings unless you select the optional fittings pack which includes a ring latch, hinges and a drop bolt.

Wooden Posts. Concrete in posts must be dug in approximately 40cm deep. A small gap much be left between the post and the gate to allow for expansion of the wood.

Finish. The Quorn gates are supplied pressure treated which leaves them with a slightly green finish which if left untreated will fade or provides an ideal base for you to stain the timber in a colour of your choice.