Made to Measure Stirling Tall Single Gate

Made to Measure Stirling Tall Single Gate
Please ensure you scroll down and read the guide "How to work out what size to order" then follow the instructions "How to order your made to measure gate" as mistakes cannot be rectified once your gate has been produced to the measurements provided.
Delivery Time: 3 to 4 weeks
Delivery Cost: FREE
Delivery Notes: Delivery charges apply to Highlands & Islands
Brand BIC
Model Number BIC084M
In Stock Yes
Select Your Made to Measure Dimensions
To calculate your price, slide the tabs along the bars or type the dimensions into the boxes below:
Gap Width
mm
inches
Height
mm
inches
Price
Maximum
2134mm
84.02inches
Minimum
1200mm
47.24inches
Minimum
500mm
19.69inches
Maximum
1524mm
60inches
Available Options:
Locking Option:
Gate Posts:
Add Any Comments & Notes:
(Optional)
Product Description

If the standard sizes available for the Stirling Tall Single Gate are not going to fit your opening, a made to measure service is available and can be ordered online. Please ensure you read the information below about how to work out the size you need to order and then follow the simple steps detailed below to place your order.


How to work out what size to order

For the width, measure the gap you have between your walls or posts. If you are replacing an existing gate, do not measure the gate itself as this will not take into account the space for the hinges and latch that are supplied with your gate.

For example: If the gap you have is 1000mm and you do not need posts, the width you should specify is 1000mm. If you do require posts, the measurement you need to specify is the gap between your posts. So if you have a 1000mm gap and need to install 2 x 70mm posts, the gap width for your gate should be entered as 860mm.

Measure the height of gate you require, from the bottom of the frame to the highest point in the gate. Remember to allow for ground clearance, typically 50mm (2") or more if your ground slopes.

Refer to the diagram above for an illustration of the measurements you need or contact us if you are unsure and one of our team will be happy to help you.


How to order your made to measure gate

Step 1. Enter the gap width in millimetres or inches. Eg. If your gap between walls or posts is 1000mm, enter "1000" in the box.

Step 2. Enter the gate height measurement in millimetres or inches. Eg. If your overall gate height is 2000mm, enter "2000" in the box

Step 3. Made to measure 70mm square gate posts are available for £60 each. Select the number you require.

Step 4. For security, the Stirling Tall Single Gates can be padlocked as standard (padlock not supplied). If you would prefer to lock the gate with a key, please select the mortice lock option.

The price of your made to measure gate will be displayed as you enter your measurements. This price is the total price, including VAT and delivery (excluding Highlands & Islands). When you are ready, click "Add to Basket" and go through the checkout to complete your purchase

If the size of gate you require is smaller or larger than the minimum and maximum measurements shown in the illustration above, please contact us with your measurements and if we can make it, we will be happy to provide you with a quotation.


General Information

Fittings. The Stirling Tall Single Gate is supplied with hinges, latch and striker plate. Self tapping screws are also included.

Opening Directions. The Stirling Tall Single Gate is supplied with a universal latch for left/right hand opening.

Square Steel Posts. Posts are only required if you do not already have walls or posts in place on which to hang the gate. Please note the hinges and striker require a flat vertical surface for installation.

Finish. The Stirling Tall Single Gate is supplied dipped in a black primer ready for you to paint with a top coat in the colour of your choice. We recommend Hammerite but any exterior metal paint can be applied.

FRAME

25mm x 6mm (up to 3ft)
25mm x 10mm (3ft 1in +)

INFILL BARS 10mm Diameter
OPENING DIRECTION Universal
PADLOCKABLE Yes
HINGES/LATCH/FITTINGS Included
WIDTH TOLERANCE +/- 10mm
FINISH Black primed

 

Customers who bought this product also purchased

£23.95
SAVE £6.00 (20%)
Improve the quality and appearance of your lawn by removing unwelcome moss and thatch...[more]
More Information
£23.95
SAVE £6.00 (20%)
Lawns can become compacted which starves the roots of air and can lead to drainage...[more]
More Information
£244.00
Please ensure you scroll down and read the guide "How to work out what size to order" then...[more]
More Information
Exclusive FREE newsletter promotions!

VAT Registration No: 860 4228 38 - Copyright © 2014 Garden Oasis Limited - All rights reserved