Made to Measure Stirling Tall Double Gates

Made to Measure Stirling Tall Double Gates
Please ensure you scroll down and read the guide "How to work out what size to order" then follow the instructions "How to order your made to measure gate" as mistakes cannot be rectified once your gates have been produced to the measurements provided.
Delivery Time: 3 to 4 weeks
Delivery Cost: FREE
Delivery Notes: Delivery charges apply to Highlands & Islands
Brand BIC
Model Number BIC085M
In Stock Yes
Select Your Made to Measure Dimensions
To calculate your price, slide the tabs along the bars or type the dimensions into the boxes below:
Gap Width
mm
inches
Height
mm
inches
Price
Maximum
2134mm
84.02inches
Minimum
1200mm
47.24inches
Minimum
1500mm
59.06inches
Maximum
4000mm
157.48inches
Available Options:
Gate Posts:
Add Any Comments & Notes:
(Optional)
Product Description

If the standard sizes available for the Stirling Tall Double Gates are not going to fit your opening, a made to measure service is available and can be ordered online. Please ensure you read the information below about how to work out the size you need to order and then follow the simple steps detailed below to place your order.


How to work out what size to order

For the width, measure the gap you have between your walls or posts. If you are replacing an existing gate, do not measure the gate itself as this will not take into account the space for the hinges and latch that are supplied with your gate.

For example: If the gap you have is 3000mm and you do not need posts, the width you should specify is 3000mm. If you do require posts, the measurement you need to specify is the gap between your posts. So if you have a 3000mm gap and need to install 2 x 70mm posts, the gap width for your gate should be entered as 2860mm.

Measure the height of gate you require, from the bottom of the frame to the highest point in the gate. Remember to allow for ground clearance, typically 50mm (2") or more if your ground slopes.

Refer to the diagram above for an illustration of the measurements you need or contact us if you are unsure and one of our team will be happy to help you.


How to order your made to measure gate

Step 1. Enter the gap width in millimetres or inches. Eg. If your gap between walls or posts is 3000mm, enter "3000" in the box.

Step 2. Enter the gate height measurement in millimetres or inches. Eg. If your overall gate height is 2000mm, enter "2000" in the box

Step 3. Made to measure 70mm square gate posts are available for £60 each. Select the number you require.

The price of your made to measure gate will be displayed as you enter your measurements. This price is the total price, including VAT and delivery (excluding Highlands & Islands). When you are ready, click "Add to Basket" and go through the checkout to complete your purchase.

If the size of gate you require is smaller or larger than the minimum and maximum measurements shown in the illustration above, please contact us with your measurements and if we can make it, we will be happy to provide you with a quotation.


General Information

Fittings. The Stirling Tall Double Gates are supplied with hinges, latch and two drop bolts. Self tapping screws are also included.

Opening Directions. The Stirling Tall Double Gates can open in both directions. The latch is fitted to the right gate when viewed from the road.

Square Steel Posts. If you are installing directly onto brickwork, due to the weight of the gates, care should be taken to ensure the brickwork is strong enough to support them. Steel posts which are concreted into the ground are recommended to avoid damage to brickwork. Please note that the hinges require a flat vertical surface for installation.

Finish. The Stirling Tall Double Gates are supplied dipped in a black primer ready for you to paint with a top coat in the colour of your choice. We recommend Hammerite but any exterior metal paint can be applied.

FRAME 30mm x 10mm
INFILL BARS 12mm Diameter
OPENING DIRECTION Universal
PADLOCKABLE Yes
HINGES/LATCH/FITTINGS Included
WIDTH TOLERANCE +50mm / -10mm
FINISH Black primed

 

Customers who bought this product also purchased

£35.00
Please ensure you scroll down and read the guide "How to work out what size to order" then...[more]
More Information
0 items
Oakington Arbour
Oakington Arbour
 
£149.95
SAVE £90.00 (38%)
15m Hose Starter Kit
15m Hose Starter Kit
 
£12.95
SAVE £7.00 (35%)
Exclusive FREE newsletter promotions!

VAT Registration No: 860 4228 38 - Copyright © 2014 Garden Oasis Limited - All rights reserved