If the standard size Saxon Railing is not going to fit your opening, a made to measure service is available and can be ordered online. Please ensure you read the information below about how to work out the size you need to order and then follow the 5 simple steps detailed below to place your order.
How to work out what size to order
For the width, measure the gap you have between your pillars or posts. If you are replacing an existing railing panel, do not measure the railing itself as this will not take into account the space for the hinges that are supplied and required for installation. Therefore, if the gap between your pillars is 1500mm the width you should specify is 1500mm.
If your gap is over 2000mm, the railing will be supplied in two equal sections that bolt together to form one continuous railing. The railing is supported where they join by a 50mm (2") long leg attached to a bolt down footplate. This removes the need for joining posts. Over 4000mm, the railing will be in 3 equal sections with two bolt down legs and so on.
Measure the height of railing you require, from the bottom of the frame to the highest point on the railing. Remember to leave space for the 50mm leg and footplate for railings over 2000mm long.
How to order your made to measure railing
Step 1. Type in the exact gap measurement (imperial or metric) Eg. If your gap between pillars or posts is 1500mm, enter "1500" in the box.
Step 2. Type in the exact height measurement. Eg. If the railing height you require is 400mm, enter "400" on the box.
The price of your made to measure railing will be displayed as you enter your measurements. This price is the total price, including VAT and delivery (excluding Highlands & Islands). When you are ready, click "Add to Basket" and go through the checkout to complete your purchase.
If the size of railing you require is larger or smaller than the website will allow you to order, please contact us with your measurements and we will be happy to provide you with a quotation.
General Information
Fittings. The Saxon Railings are supplied with hinges and self tapping screws. Please note the hinges require a flat vertical surface for installation.
Finish. The railing is supplied dipped in a black primer ready for you to paint with a top coat in the colour of your choice. We recommend Hammerite but any exterior metal paint can be applied.
|
FRAME |
25mm x 10mm |
|
INFILL BARS |
12mm Diameter |
|
HINGES & FITTINGS |
Included |
|
WIDTH ADJUSTMENT |
None |
|
FINISH |
Black Primed |
