If the standard sizes available for the Manor Tall Single Gate are not going to fit your opening, a made to measure service is available and can be ordered online. Please ensure you read the information below about how to work out the size you need to order and then follow the 6 simple steps detailed below to place your order.
How to work out what size to order
For the width, measure the gap you have between your walls or posts. If you are replacing an existing gate, do not measure the gate itself as this will not take into account the space for the hinges and latch that are supplied with your gate.
For example: If the gap you have is 100cm and you do not need posts, the width you should specify is 100cm. If you do require posts, the measurement you need to specify is the gap between your posts. So if you have a 100cm gap and need to install 2 x 7cm posts, the gap width for your gate should be entered as 86cm.
Measure the height of gate you require, from the bottom of the frame to the highest point in the gate. Remember to allow for ground clearance, typically 5cm (2") or more if your ground slopes.
How to order your made to measure gate
Step 1. Choose the price band your gap width falls into.
Eg. If your gap is 100cm, you would select gap width 'up to 1066mm (42")'.
If your gap is over the maximum shown, we are unable to make the size you require in this gate design.
Step 2. Choose the price band your gate height falls into.
Eg. If your gate height is 190cm, you would select gate height 'up to 2134mm (84")'.
If your gate height is over the maximum shown, we are unable to make the size you require in this gate design.
Step 3. Type in the exact gap measurement (imperial or metric)
Eg. If your gap between walls or posts is 100cm, enter "100cm" in the box.
Step 4. Type in the exact height measurement (imperial or metric)
Eg. If your overall gate height is 190cm, enter "190cm" in the box
Step 5. Enter any notes relating to the production of your order.
Step 6. Made to measure 7cm (3") square gate posts are available for £50 each. Select the number you require.
Step 7. For security, the Manor Tall Single Gates can be padlocked as standard (padlock not supplied). If you would prefer to lock the gate with a key, please select the mortice lock option.
Then click the 'Add to Basket' button to calculate your total price.
General Information
Fittings. The Manor Tall Single Gate is supplied with hinges, latch and striker plate. Self tapping screws are also included.
Opening Directions. The Manor Tall Single Gate is supplied with a universal latch for left/right hand opening.
Square Steel Posts. Posts are only required if you do not already have walls or posts in place on which to hang the gate. Please note the hinges and striker require a flat vertical surface for installation.
Finish. The Manor Tall Single Gate is supplied dipped in a black primer ready for you to paint with a top coat in the colour of your choice. We recommend Hammerite but any exterior metal paint can be applied.
| FRAME |
25mm x 10mm |
| INFILL BARS |
12mm Diameter |
| OPENING DIRECTION |
Universal |
| PADLOCKABLE |
Yes |
| HINGES/LATCH/FITTINGS |
Included |
| WIDTH TOLERANCE |
+/- 10mm |
| FINISH |
Black primed |
