If the standard size Manor Fence Panel is not going to fit your opening, a made to measure service is available and can be ordered online. Please ensure you read the information below about how to work out the size you need to order and then follow the 5 simple steps detailed below to place your order.
How to work out what size to order
For the width, measure the gap you have between your walls or posts. If you are replacing an existing fence panel, do not measure the fence itself as this will not take into account the space for the hinges that are supplied and required for installation.
For example: If the gap you have is 150cm and you do not need posts, the width you should specify is 150cm. If you do require posts, the measurement you need to specify is the gap between your posts. So if you have a 150cm gap and need to install 2 x 5cm posts, the gap width for your fence should be entered as 140cm.
Measure the height of fence you require, from the bottom of the frame to the highest point on the fence. Remember to allow for ground clearance, typically 5cm (2") or more if your ground slopes.
How to order your made to measure fence
Step 1. Choose the price band your gap width falls into.
Eg. If your gap is 150cm, you would select gap width 'up to 1520mm (60")'.
If your gap is over 2000mm (78"), you will need to order more than one fence panel and a joining post.
Step 2. Choose the price band your fence height falls into.
Eg. If your fence height is 100cm, you would select fence height 'up to 1220m (48")'.
If your required fence height is over the maximum shown, please contact us for a quotation.
Step 3. Type in the exact gap measurement (imperial or metric)
Eg. If your gap between walls or posts is 150cm, enter "150cm" in the box.
Step 4. Type in the exact height measurement (imperial or metric)
Eg. If your required fence height is 100cm, enter "100cm" in the box
Step 5. Enter any notes relating to the production of your order.
Then click the 'Add to Basket' button to calculate your total price.
General Information
Fittings. The Manor Fence Panel is supplied with hinges and self tapping screws. Please note the hinges require a flat vertical surface for installation.
Finish. The Manor Fence is supplied dipped in a black primer ready for you to paint with a top coat in the colour of your choice. We recommend Hammerite but any exterior metal paint can be applied.
| FRAME |
25mm x 10mm |
| INFILL BARS |
12mm Diameter |
| HINGES & FITTINGS |
Included |
| WIDTH ADJUSTMENT |
None |
| FINISH |
Black Primed |
