Made to Measure Balmoral Tall Double Gates

If the standard sizes available for the Balmoral Tall Double Gates are not going to fit your opening, a made to measure service is available and can be ordered online. Please ensure you read the information below about how to work out the size you need to order and then follow the simple steps detailed below to place your order.

How to work out what size to order

For the width, measure the gap you have between your walls or posts. If you are replacing an existing gate, do not measure the gate itself as this will not take into account the space for the hinges and latch that are supplied with your gate.

For example: If the gap you have is 3000mm and you do not need posts, the width you should specify is 3000mm. If you do require posts, the measurement you need to specify is the gap between your posts. So if you have a 3000mm gap and need to install 2 x 150mm posts, the gap width for your gate should be entered as 2700mm.

Measure the height of gate you require, from the bottom of the frame to the highest point in the gate. Remember to allow for ground clearance, typically 50mm (2") or more if your ground slopes.

Refer to the diagram above for an illustration of the measurements you need or contact us if you are unsure and one of our team will be happy to help you.

How to order your made to measure gate

Step 1. Enter the gap width in millimetres or inches. Eg. If your gap between walls or posts is 3000mm, enter "3000" in the box.

Step 2. Enter the gate height measurement in millimetres or inches. Eg. If your overall gate height is 2000mm, enter "2000" in the box

Step 3. Made to measure 150mm (6") square gate posts are available for £250 each. Select the number you require.

The price of your made to measure gate will be displayed as you enter your measurements. This price is the total price, including VAT and delivery (excluding Highlands & Islands). When you are ready, click "Add to Basket" and go through the checkout to complete your purchase

If the size of gate you require is larger or smaller than the website will allow you to order, please contact us with your measurements and we will be happy to provide you with a quotation.

General Information

Fittings. The Balmoral Tall Double Gates are supplied with hinges, latch and two drop bolts.

Opening Directions. The Balmoral Tall Double Gates can open in both directions. The latch is fitted to the right gate when viewed from the road.

Square Steel Posts. If you are installing directly onto brickwork, due to the weight of the gates, care should be taken to ensure the brickwork is strong enough to support them. Steel posts which are concreted into the ground are recommended to avoid damage to brickwork. Please note that the hinge plates require a flat vertical surface for installation.

Finish. The Balmoral Tall Double Gates are supplied dipped in a black primer ready for you to paint with a top coat in the colour of your choice. We recommend Hammerite but any exterior metal paint can be applied.