Using Store as ADMIN
5 5 3

Drayton Arch Top Estate Gates

  • Drayton Arch Top Estate Gates
  • Brand: BIC
  • Product Code: BIC601
  • SKU:
  • Availability: In Stock
    Delivery: Direct from the factory in 1 to 2 weeks
  • £644.95


Free Delivery*

Share



The Drayton Arch Top Estate Gates are a beautifully crafted pair of solid wooden gates, with thick frames and bracing designed to provide strong and durable security for your property. The gates are hand made in the UK using smooth planed Scandinavian Redwood which has been pressure treated for a long, maintenance free life. The front boards are a tongue and groove construction, framed on both sides and across the curved top. Each gate has two vertical, three horizontal and four diagonal heavy duty braces on the back for maximum strength and durability. The top of these gates are arched, rising from 1500mm at the side to 1800mm in the centre.

The matching Drayton Tall Single Gate can be used in conjunction with these gates to provide separate pedestrian access to the side of the driveway.

It is recommended that wooden gate posts are used when installing these gates. Optional smooth sawn pressure treated 15cm x 15cm square posts are available.

An optional galvanised fittings pack that includes a Ring Latch, 4 x 24 inch Hook & Band Hinges and an 18 inch Drop Bolt is also available.

The Drayton Arch Top Estate Gates are available in the following sizes:

OPTIONGATE WIDTH*GATE HEIGHTPRICE
240cm2400mm (94.5")1800mm (71")£644.95
270cm2700mm (106.5")1800mm (71")
£714.95
300cm3000mm (118")1800mm (71")
£774.95
330cm3300mm (130")1800mm (71")
£844.95
360cm3600mm (142")1800mm (71")
£914.95

*Please note that the Gate Width refers to the total width of the pair of gates, not each gate.

See size chart below to calculate how much space you will require to install your gate when using our 15cm (6") square gate posts.

GATE WIDTHEXPANSION GAPPAIR OF POSTSTOTAL GAP REQUIRED
240cm2cm30cm272cm (107")
270cm2cm30cm302cm (119")
300cm2cm30cm332cm (131")
330cm2cm30cm362cm (142.5")
360cm2cm30cm392cm (154.5")

If our standard sizes won't fit, a made to measure service is available for this gate. Please click the tab below to be directed to the made to measure page.

View Made to Measure

Information about your gate

Fittings. The Drayton gates are not supplied with any fittings; however an optional fittings pack is available which includes a drop bolt plus the correct size hinges and latch for this weight of gate. The fittings we have available are galvanised to prevent rust. Each gate has three horizontal braces on the back. Hinges should be fitted to the top and bottom brace.

Wooden Posts. Posts should be dug in approximately 60cm deep and held in place with concrete, or bolted to the wall using masonry bolts or frame fixing screws. A small gap must be left between the post and the gate to allow for expansion of the wood.

Finish. The Drayton gates are supplied pressure treated which leaves the wood with a temporary green tint. If left to weather, the wood will fade to a silvery grey colour; however you can change the colour straight away by staining the wood using Protek Timber Eco Shield, or it can be painted after it has been allowed to weather for at least 3 months using a product compatible for use with pressure treated timber. 

Specification

SIDE FRAME70mm x 70mm
BACK BRACING70mm x 54mm and 44mm x 44mm
TONGUE & GROOVE BOARDS95mm x 14mm
JOINTSMortise and tenon
WOOD TREATMENTPressure treated

 Direct from the factory in 1 to 2 weeks
 Delivery to UK mainland only. Surcharges apply to Highlands.

 FREE
 Surcharge applies for Highlands and Islands
 Not available for delivery

Write a review

Note: HTML is not translated!
    Bad           Good
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.







Add GardenOasis App. Press Then select "Add to Home Screen"