The Drayton Wooden Estate Gates are constructed from smooth planed Scandinavian Redwood which has been pressure treated for a long life.
Wooden Gate Posts are recommended when installing this gate. Smooth planed 15cm x 15cm concrete in pressure treated posts are available in the following options:
- 15cm x 15cm x 240cm Pyramid Top Concrete in Post - £40 per post
- 15cm x 15cm x 180cm Round Top Wall Mounted Post - £35 per post.
A fittings pack is available for this gate for £61.95 and includes a Ring Latch Set and 4 x Hinges Bands, 4 x Screw-On Hinge Plates and an 18" drop bolt set.
| FRAME & STILES |
75mm x 75mm |
| TOUNGE & GROOVE |
125mm x 16mm |
| FINISH |
Pressure Treated |
Gate available in the following sizes:
- 248cm (97.5") Gap Width x 180cm (71") Gate Height - £419.95
- 272cm (107") Gap Width x 180cm (71") Gate Height - £459.95
- 294cm (116") Gap Width x 180cm (71") Gate Height - £499.95
- 358cm (141") Gap Width x 180cm (71") Gate Height - £579.95
Please note - Gate measures 152cm at the sides rising to 180cm in the centre.
See size chart below to calculate how much space you will require to install your gate when using our 15cm x 15cm posts.
| Gate Width |
Expansion Gap |
Pair of Posts |
Total Gap Required |
| 248cm (97.5") |
2cm |
30cm (12") |
280cm (110") |
| 272cm (107") |
2cm |
30cm (12") |
304cm (119.5") |
| 294cm (118") |
2cm |
30cm (12") |
326cm (138.25") |
| 358cm (141.75") |
2cm |
30cm (12") |
390cm (153.5") |
Information about your gate
Fittings. All wooden gates require hinges, latch and a fixing kit to attach your gate to timber posts.
Wooden Posts. Concrete in posts must be dug in approximately 60cm deep. A 1cm gap much be left between the post and the gate to allow for expansion of the wood.
Finish. All wooden gates are supplied pressure treated which leaves them with a slightly green finish which if left untreated will fade or provides an ideal base for you to stain the timber in a colour of your choice.
|
