The Derbyshire Single Gates are constructed from solid Scandinavian Redwood, and finished with a cedar base coat. Included with the gate are two heavy duty 18" reversible hinges and a heavy duty 9" twisted ring latch.
Wooden Gate Posts are required to hang this gate. Smooth planed 4x4" concrete in or 4x3" wall mounted pressure treated posts are available for £20 per post.
When ordering, please select whether you require a left or right hanging gate (when viewed from the roadside).
| FRAME |
75mm x 75mm |
| TOUNGE & GROOVE |
125mm x 16mm |
| JOINTS |
Mortice & Tenon |
| OPENING DIRECTION |
Specify when ordering |
| HINGES & LATCH |
Included |
| WIDTH ADJUSTMENT |
+10mm / -10mm |
| FINISH |
Natural |
Available in the following sizes:
- 2ft 6in x 3ft (76cm x 92cm) - £149.95
- 3ft 0in x 3ft (92cm x 92cm) - £154.95
- 3ft 6in x 3ft (107cm x 92cm) - £159.95
See size chart below to calculate how much space you will require to install your gate using our 4" x 3" wall mounted posts.
| Gate Width |
Expansion Gap |
Pair of Posts |
Total Gap Required |
| 2ft 6in (76cm) |
0.5in (1.5cm) |
6in (15cm) |
3ft 0.5in (93cm) |
| 3ft 0in (91.5cm) |
0.5in (1.5cm) |
6in (15cm) |
3ft 6.5in (108cm) |
| 3ft 6in (107cm) |
0.5in (1.5cm) |
6in (15cm) |
4ft 0.5in (123cm) |
See size chart below to calculate how much space you will require to install your gate using our 4" x 4" concrete in posts.
| Gate Width |
Expansion Gap |
Pair of Posts |
Total Gap Required |
| 2ft 6in (76cm) |
0.5in (1.5cm) |
8in (20.5cm) |
3ft 2.5in (98cm) |
| 3ft 0in (91.5cm) |
0.5in (1.5cm) |
8in (20.5cm) |
3ft 8.5in (113cm) |
| 3ft 6in (107cm) |
0.5in (1.5cm) |
8in (20.5cm) |
4ft 2.5in (128cm) |
Information about your gate
Fittings. All wooden gates are supplied with hinges, latch and a fixing kit to attach your gate to timber posts.
Wooden Posts. Wall fixing posts must be secured in at least 3 places with rawl bolts (not supplied). Concrete in posts must be dug in 24" deep. A quarter inch (7.5mm) gap much be left between the post and the gate to allow for expansion of the wood.
Finish. All wooden gates are supplied untreated and require a minimum of 3 coats of wood preserver (not varnish or creosote) before attaching the fittings and installing the gate.
|
