The Carlton Wooden Tall Single Gates are constructed from smooth planed Scandinavian Redwood which has been pressure treated for a long life.
Wooden Gate Posts are recommended when installing this gate. Smooth planed 10cm x 10cm concrete in pressure treated posts are available for £20 per post.
A fittings pack is available for this gate for £11.95 and includes a Ring Latch Set and 2 x 16" Medium Tee Hinges.
| BRACING |
100mm x 25mm |
| TONGUE & GROOVE |
110mm x 12mm |
| JOINTS |
n/a |
| FINISH |
Pressure Treated |
| OPENING DIRECTION |
Left or Right handed |
| WIDTH ADJUSTMENT |
None |
Gate available in the following sizes:
- 79cm (31") Gap Width x 180cm (71") Gate Height - £84.95
- 90cm (35.5") Gap Width x 180cm (71") Gate Height - £84.95
- 102cm (40") Gap Width x 180cm (71") Gate Height - £84.95
Specification
See size chart below to calculate how much space you will require to install your gate when using our 10cm x 10cm concrete in posts.
| Gate Width |
Expansion Gap |
Pair of Posts |
Total Gap Required |
| 79cm (31") |
1cm |
20cm (8") |
100cm (39.5") |
| 90cm (35.5") |
1cm |
20cm (8") |
111cm (44") |
| 102cm (40") |
1cm |
20cm (8") |
123cm (48.5") |
Information about your gate
Fittings. All wooden gates require hinges, latch and a fixing kit to attach your gate to timber posts.
Wooden Posts. Concrete in posts must be dug in approximately 60cm deep. A 0.5cm gap much be left between the post and the gate to allow for expansion of the wood.
Finish. All wooden gates are supplied pressure treated which leaves them with a slightly green finish which if left untreated will fade or provides an ideal base for you to stain the timber in a colour of your choice.
|
