Carlton Tall Double Gates

The Carlton Double Gates are a great value solution to securing smaller entrances and storage areas. The gates are made from quality smooth planed Scandinavian Redwood that has been pressure treated for a long maintenance free life.

It is recommended that wooden gate posts are used when installing these gates. Matching smooth planed 10cm x 10cm x 240cm concrete in pressure treated posts are available for £20 per post.

An optional fittings pack is available for these gates for £19.95 which includes a Ring Latch Set, 4 x 16" Medium Tee Hinges and a Drop Bolt.

The Carlton Tall Double Gates are available in the following sizes:

• 150cm Gate Width x 180cm Gate Height - £179.95
• 180cm Gate Width x 180cm Gate Height - £189.95
• 210cm Gate Width x 180cm Gate Height - £199.95

If our standard sizes won't fit, a made to measure service is available for this gate. Please click the tab below to be directed to the made to measure page.

Specification

BRACING	100mm x 25mm
TONGUE & GROOVE	110mm x 12mm
FINISH	Pressure Treated Timber

See size chart below to calculate how much space you will require to install your gate when using our 10cm x 10cm posts.

Gate Width	Expansion Gap	Pair of Posts	Total Gap Required
150cm	2cm	20cm (10cm x 2)	172cm
180cm	2cm	20cm (10cm x 2)	202cm
210cm	2cm	20cm (10cm x 2)	232cm

Information about your gate

Fittings. The Carlton gates are supplied without fittings unless you select the optional fittings pack which includes a ring latch, hinges and a drop bolt.

Wooden Posts. Concrete in posts must be dug in approximately 60cm deep. A small gap much be left between the post and the gate to allow for expansion of the wood.

Finish. The Carlton gates are supplied pressure treated which leaves them with a slightly green finish which if left untreated will fade or provides an ideal base for you to stain the timber in a colour of your choice.