Carlton Flat Top Single Gate

The Carlton Wooden Tall Single Gates are constructed from smooth planed Scandinavian Redwood which has been pressure treated for a long life. The simple design provides a cost effective gate with which to secure the entrance to your garden.

Wooden Gate Posts are recommended when installing this gate. Smooth planed 10cm x 10cm concrete in pressure treated posts are available for £20 per post.

An optional fittings pack is available for this gate for £11.95 which includes a Ring Latch Set and 2 x 16 inch Medium Tee Hinges.

The Carlton Gate available in the following sizes:

• 75cm Gate Width x 180cm Gate Height - £89.95
• 90cm Gate Width x 180cm Gate Height - £94.95
• 105cm Gate Width x 180cm Gate Height - £99.95

If our standard sizes won't fit, a made to measure service is available for this gate. Please click the tab below to be directed to the made to measure page.

Specification

BRACING	100mm x 25mm
TONGUE & GROOVE	110mm x 12mm
FINISH	Pressure Treated
OPENING DIRECTION	Left or Right handed

See size chart below to calculate how much space you will require to install your gate when using our 10cm x 10cm concrete in posts.

Gate Width	Expansion Gap	Pair of Posts	Total Gap Required
75cm	1cm	20cm	96cm
90cm	1cm	20cm	111cm
105cm	1cm	20cm	126cm

Information about your gate

Fittings. All wooden gates require hinges, latch and a fixing kit to attach your gate to timber posts.

Wooden Posts. Concrete in posts must be dug in approximately 60cm deep. A 0.5cm gap much be left between the post and the gate to allow for expansion of the wood.

Finish. All wooden gates are supplied pressure treated which leaves them with a slightly green finish which if left untreated will fade or provides an ideal base for you to stain the timber in a colour of your choice.