The Balmoral Tall Double Gates are made from solid steel for a traditional wrought iron appearance. These top of the range heavyweight gates provide excellent security combined with beautiful design that would compliment the grandest of buildings.
| FRAME |
40mm x 10mm
40mm x 30mm Hanging Stiles |
| INFILL BARS |
16mm Diameter |
| OPENING DIRECTION |
Universal |
| PADLOCKABLE |
Yes |
| HINGES/LATCH/FITTINGS |
Included |
| WIDTH TOLERANCE |
+50mm / -10mm |
| FINISH |
Black primed |
Available in the following options:
- 8ft - Fits opening 243.8cm (8') - Height 208.2cm (82") - £1499.95
- 10ft - Fits opening 304.8cm (10') - Height 208.2cm (82") - £1649.95
Gate posts available for £229 - Size 15cm (6") square
How to Measure Gates
For the width, measure the gap you have between your walls or posts. If you are replacing an existing gate, do not measure the gate itself as this will not take into account the space for the hinges that are supplied with your gate.
For example, if the measurement between your walls is 10ft. You should order the 10ft gate. If you also require posts, the space taken by the posts will be in additional to the gap required for the gate, so a 10ft gate and 2 x 6in posts will require a total opening of 11ft.
The height measurement of the gate is from the bottom frame to the highest point on the gate.
When installing your gate, remember to allow for ground clearance, typically 50mm (2") or more if your ground slopes.
General Information
Fittings. The Balmoral Tall Double Gates are supplied with hinges, latch and two drop bolts.
Opening Directions. The Balmoral Tall Double Gates can open in both directions. The latch is fitted to the right gate when viewed from the road.
Square Steel Posts. If you are installing directly onto brickwork, due to the weight of the gates, care should be taken to ensure the brickwork is strong enough to support them. Steel posts which are concreted into the ground are recommended to avoid damage to brickwork. Please note that the hinge plates require a flat vertical surface for installation.
Finish. The Balmoral Tall Double Gates are supplied dipped in a black primer ready for you to paint with a top coat in the colour of your choice. We recommend Hammerite but any exterior metal paint can be applied.
|
