The Balmoral Railings are made from the finest materials to ensure the very best quality. These top of the range solid steel heavyweight railings have a traditional wrought iron appearance and the elegant design will compliment the most stately buildings.
| FRAME |
40mm x 10mm |
| INFILL BARS |
16mm Diameter |
| HINGES & FITTINGS |
Included |
| WIDTH ADJUSTMENT |
None |
| FINISH |
Black Primed |
Size: Fits gap width 1830mm (6'0") - Height 559mm (22")

Measuring your Railings
For the width, measure the gap you have between your pillars or posts. If you are replacing an existing railing panel, do not measure the railing itself as this will not take into account the space for the hinges that are supplied and required for installation. If you are building a new wall, ensure you leave a gap between your pillars of exactly 1830mm (6ft).
If your gap is more or less than 1830mm (6ft), click on the made to measure button above where you can have the railing made to your exact measurements.
General Information
Fittings. The Balmoral Railings are supplied with hinges and self tapping screws. Please note the hinges require a flat vertical surface for installation.
Finish. The railing is supplied dipped in a black primer ready for you to paint with a top coat in the colour of your choice. We recommend Hammerite but any exterior metal paint can be applied.
|